[sdiy] EFM ?

John L Marshall john.l.marshall at gte.net
Tue Oct 16 02:13:03 CEST 2001


I recently sent a special ribbon cable to switzerland for US$1.60.

----- Original Message -----
From: Larry <ltroth at socal.rr.com>
To: Philip Olsson <olsson at lajnux.nu>; Synth DIY
<synth-diy at dropmix.xs4all.nl>
Sent: Monday, October 15, 2001 7:04 AM
Subject: Re: [sdiy] EFM ?


> Philip
>
> Have you checked out his web page?  Most of his bare boards are available
> for about US$10.
> Given the size and weight of bare PCB's, I would think that it should not
> be very expensive
> to have a couple of boards shipped?
>
> Larry
>
> At 08:17 AM 10/15/01 +0200, Philip Olsson wrote:
> >That´s too bad
> >I have been thinking about buying one of his boards
> >but it is very expensive transport. And iam a very poor student.
> >Thanks again for your help
> >----- Original Message -----
> >From: "harry" <harrybissell at prodigy.net>
> >To: "Philip Olsson" <olsson at lajnux.nu>
> >Sent: Monday, October 15, 2001 6:06 AM
> >Subject: Re: [sdiy] EFM ?
> >
> >
> > > Hi Phillip...
> > >
> > > Tom doesn't have his schematics posted anymore because too
> > > many people (mostly on synth-diy) would build his modules
> > > from the schematic (without buying the board etc.) and then
> > > bad-mouth Tom when thry could not get them working.
> > >
> > > I'd join EFM synth and ask for what you'd like to see. If you
> > > make a direct request Tom will usually post the schematic...
> > >
> > > This is also partly because of ALLEGATIONS that Dieter
> > > Dopfer has acquired schematics from list members.
> > >
> > > H^) hary
> > >
> > > Philip Olsson wrote:
> > >
> > > > Thanks a lot
> > > > Don´t he has the (great)service of schematics longer?
> > > > I remember som good stuff from there
> > > > // Olsson
> > > > ----- Original Message -----
> > > > From: "Larry" <ltroth at socal.rr.com>
> > > > To: "Philip Olsson" <olsson at lajnux.nu>; "Synth DIY"
> > <synth-diy at dropmix.xs4all.nl>
> > > > Sent: Sunday, October 14, 2001 6:41 PM
> > > > Subject: Re: [sdiy] EFM ?
> > > >
> > > > > Check out: http://www.ele4music.com/
> > > > >
> > > > > There is also an open discussion group on Yahoo at:
> > > > > http://groups.yahoo.com/group/EFM_Synth
> > > > >
> > > > > Larry
> > > > >
> > > > > At 03:34 PM 10/14/01 +0200, Philip Olsson wrote:
> > > > > >Hello
> > > > > >Iam woundering what happend whit Tomg Efm?
> > > > > >Can´t find him anywhere........He had alot of good stufff
> > > > > >//Olsson
> > > > >
> > > > >
> > >
> > > --
> > > Jihad Terrorism Conspiracy New World Order
> > > Revolution Black Helicopters Freedom of
> > > Speech First Amendment Rights: Carnivore Bait
> > > go ahead and READ my e-mail I have nothing to
> > > hide... how about YOU ???
> > >
> > >
> > >
>




More information about the Synth-diy mailing list