[sdiy] Hollow low-pressure ladder filter

[René Schmitz]

Hi Tim et al, 

At 15:37 28.04.02 -0700, Tim Ressel wrote:
>According to the data sheet curves, at the low
>currents I am using the voltage drop will be less than
>2 volts. I am wiring up the chain right now, so I will
>find out first hand what the drops are.

Sounds reasonable, since these were used as small signal 
rectifiers. 

>> When you get the ladder working, you should then try
>> to replace the rest of
>> the solid state parts in the signal path with tubes.
>
>I have thought of that. It is a possibly.

Would be difficult to run on 15V I'd guess. 

Cheers,
 René


-- 
uzs159 at uni-bonn.de
http://www.uni-bonn.de/~uzs159