Odp: [sdiy] Polymoog as Controller Keyboard?

[Roman]

I haven't tried that, although it seems like so
big power supply as in PM
wouldn't mint powering few extra modules.

Actually I wanted to ask you how did your Polymoog
work as CV source.
When I connected mine, it turned out CV is valid
only while playing upper
2 thirds of the keyboard. Anything pressed on
lower part generated no CV.
and all started from 0V at the begining of middle
keyboard part.
Do you get proper CV response from entire
keyboard?

Roman

----- Original Message -----
From: May, Tony
To: synth-diy at dropmix.xs4all.nl
Sent: Friday, August 02, 2002 7:01 PM
Subject: [sdiy] Polymoog as Controller Keyboard?


Just wondering if anyone out there has ever had
any luck, or even bothered trying, using the
Polymoog as a controller keyboard for oh, let's
say, a modular. I ask because I have now gotten
the it to a fairly good working state of being,
and have decided, for my next adventure, to try my
hand at putting together some modules. Of course,
I've got the cv and trigger outs on the Polymoog,
but what about using the accessory power
connection as a start for powering the modules? I
imagine I wouldn't want to tap into it to much and
draw too much current off of the power supply.
This may sound silly, but so did me saying I was
actually going to fix the Poly. Thoughts anyone?

Tony