[sdiy] Synth-DIY breadboard Module...

patchell patchell at silcom.com
Thu Aug 15 01:25:25 CEST 2002


    Didn't even think about toggle switches and leds (etc)...well, there is
room on the other side for another angle strip...

    I use the Xicon 24mm pots as well (best bang for the buck in my
opinion)...although, the 5/16" hole that use use sometimes bugs me, because if
I need to replace an old pot in an old project (that used 3/8" holes), they
don't fit well (I just put big washers on the panel...ugly, but it works).

John L Marshall wrote:

> Jim,
>
> I use Xicon/Alpha 24mm pots. They mount in exactly the same hole as banana
> jacks, 5/16 inch.
>
> Don't forget a couple of toggle switches, a push button and some LEDs.
>
> I have been planning to do exactly the same thing.
>
> Take care,
> John
> ---------------------------------------------------------------------------
> Pacific Northwest DIY Synthesizer meeting, July 20, 2002
> See: www.sound-photo.com
> ---------------------------------------------------------------------------
>
> ----- Original Message -----
> From: "patchell" <patchell at silcom.com>
> To: <synth-diy at dropmix.xs4all.nl>
> Sent: Wednesday, August 14, 2002 1:03 PM
> Subject: [sdiy] Synth-DIY breadboard Module...
>
> >     Maybe Harry shouldn't read this ;^) .... in involves solderless plug
> > strips...
> >
> >     I modified my solderless plug strip today (something I built from
> > off the shelf plug strips about 20 years ago).  One problem with the
> > plug strip is that it is difficult to interface with anything.
> >
> >     I mounted a 1" x 1" aluminum angle on the base board, and drilled
> > holes for 2 pots and 7 1/4" jacks...although, after I finished putting
> > the last jack in the thing, I realized I should have included some
> > banana jacks as well (I use both...guess that makes me
> > schizophrenic...).
> >
> >     Anyway, looks like it will be a lot easier to quickly build
> > something up and give it a test.
> >
> > --
> >  -Jim
> > ------------------------------------------------
> > * Visit:http://www.silcom.com/~patchell/
> > *-----------------------------------------------
> > *I'm sure glad Merry Christmas comes just once a year
> > * -Yogi Yorgensen
> > ------------------------------------------------
> >
> >

--
 -Jim
------------------------------------------------
* Visit:http://www.silcom.com/~patchell/
*-----------------------------------------------
*I'm sure glad Merry Christmas comes just once a year
* -Yogi Yorgensen
------------------------------------------------





More information about the Synth-diy mailing list