[sdiy] USB (was: Call for opinions: Walsh Module)
Paul Maddox (QinetiQ)
P.Maddox at signal.qinetiq.com
Mon Sep 9 17:49:25 CEST 2002
John,
> IMO, USB was intended for the mass distribution markets. You must obtain
a
> VID from the USB org for a pricey fee that repeats every couple of years.
> The hardware and software (device and host sides) are relatively major
> undertakings relative to MIDI or RS232.
Wrong :-)
well ok, partly Wrong...
If you buy one from FTDI, you can use their VID,
they then give you a unique second ID..
And this is for *FREE*, just ask them :-)
Also, if you're not into writing .DLLs then you can (in windows) use their
COM port .DLL which turns the USB interface into a 3rd (or 4th) com port
with a completely insane bitrate :-)
Paul
----------------------------------------------------------------------------
------
"I've seen the light at the end of the tunnel..... and its blue!"
Modulus Synth page ;-
Http://www.Modulus.Wavesynth.com/
PPG webpages
Http://www.PPG.Wavesynth.com/
Wavesynth homepage
Http://Www.Wavesynth.com/
More information about the Synth-diy
mailing list