[sdiy] Combined CV/Gate on a cable

[Magnus Danielson]

From: Harry Bissell Jr <harrybissell at prodigy.net>
Subject: Re: [sdiy] Combined CV/Gate on a cable
Date: Tue, 2 Dec 2003 10:42:49 -0800 (PST)
Message-ID: <20031202184249.67489.qmail at web80209.mail.yahoo.com>

> the NEXT (next) step would be to use those cute
> stereo jacks in the modules that allow the plug
> to go halfway in...  I'd put the gate on the tip,
> and the CV on the ring... so that in an envelope
> generator you could plug halfway in to connect the
> gate only... then all the way in would allow gate
> and CV (which might set peak level, or be mixed with
> the env. output to give kbd tracking etc...
> 
> ... so tough luck Magnus... your original standard is
> now obsolete   :^P

No, you had comments on my initial contribution. You have concluded that it is
a good idea, but proposed modifications in the details in order to provide the
support of an additional service, which where not part of the requirement
specification to the initial contribution. So Harry, your quite fine in my 
book. ;O)

Setting standards usually involve some form of consensus, but there might be a
consesus that whatever I say goes, but then I am not aware of this consesus, so
I still seek consensus... ;O)

Cheers,
Magnus