[sdiy] EDP Wasp controll via midi-cv (s-trivggers and voltages)?

[s.thomas]

Hi Julian..as far as i recall I think the wasp interface is pretty much digital? It was designed for the spider sequencer and also one could daisy chain several wasps together and operate them from one keyboard.... There is no simple cv control of pitch via the wasp interface bus if i recall correctly. However I thought kenton did do a cv-> wasp interface?..its likely to be expensive though.

cheers
steve thomas
  ----- Original Message ----- 
  From: Julian 
  To: synth-diy at dropmix.xs4all.nl 
  Sent: Monday, May 19, 2003 7:00 PM
  Subject: [sdiy] EDP Wasp controll via midi-cv (s-trivggers and voltages)?


  Hello,

  I have an edp wasp which i am looking to control from a doepfer mcv24, of which i believe i can assign gates in the 0-10v, or 0-5.3v range.

  Am i correct in thinking that i first need to convert my gate signal to an s-trigger using an NPN transistor, as shown on http://www.doepfer.de/faq/gen_faq.htm#S-Trig in order to trigger the wasp?  

  And then two things:  What sort of voltage range will i need to control pitch (i.e. will my -1 to +6v range be sufficient)? And, providing all these factors are ok, what pins on the wasps proprietary interface should i be looking at connecting to?


  Thanks for reading this, its appreciated,

  Julian

  ps. im very much in the learning stage still, so nothing overly complex please :)




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20030520/9a99193a/attachment.htm>