[sdiy] Distributing CV Gate and Trigger

[harrybissell]

Hi Pat:

For CV you peobably want to add buffer amps (non-inverting voltage
follower opamp circuits)  You feed your CV to the buffer inputs and use
the outputs separate (to each well ... output :^)

For gate and trigger it is usuallt fine to just parallel the jacks... the slight

difference in voltage will not affect operation

H^) harry

Pat Kammerer wrote:

> Hello all,
>
> This may be a simple question for all of you, but I guess that's good... : )
>
> I'm working on one if not two sequencers which will have a CV(+5v) and Gate
> output, and I will be a adding a circuit to convert the gate to a trigger.
> Since this is my first attempt at a circuit like this, I have one question.
> What measures will I need to take if I want, for example, three of each
> output?  Like 3 jacks for each CV, Gate, and trigger.  I've been assuming
> that just to put them in series or parallel would cause loading issues and
> hence inaccuracies in voltage.  I want all of the outputs to be identical if
> possible.
>
> I'm just trying to find if you with much knowledge have prefered ways of
> splitting voltages like this.
>
> Thanks in advance,
> Pat