[sdiy] Advices for ringmod and noise source

[Tim Parkhurst]

> -----Original Message-----
> From: Linium [mailto:intent at netpratique.fr]
> Sent: Wednesday, June 23, 2004 6:37 PM
> To: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] Advices for ringmod and noise source
> 
> Thank you everybody for all the answers i gathered ! :)
> 
> 
> A very simple design from ARP:
> http://www.simple-answer.com/ARPring.gif
> 

Just remember that the ARP design works ONLY with (0 to +10V max) square
wave inputs. It's basically a logic circuit.


Tim (a little square at the edges) Servo
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.676 / Virus Database: 438 - Release Date: 5/3/2004
 



***************************************************************************
This message is confidential.  The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited.  If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************