200e

the 222e touchplate and interface modules are connected by an extra
ribbon cable. so you probably wouldn't want to put them in different
cabinets.

you could put them both in the 12 and use the extra boat for other
things, preferably some relatively self-contained sub-unit like
261/292/291/281 or whatever.

if you really want a 12p cabinet and an extra boat, i'd say go for it,
you can always experiment and see what works and what doesn't within
that.

eb



On Fri, Jun 13, 2008 at 9:15 AM, tmeade1974 <tmeade1974@yahoo.com> wrote:
> Ross,
> The description of the 222e on the Buchla website is pretty clear about the
> panel
> arrangements for the 222e. The spacial sensor goes on the top boat, with the
> tactile unit
> directly below it on the bottom boat. You would definitely not want the
> sensor unit on
> your extra 4 boat next to the tactile unit as it would limit the use of the
> rings if laid flat.
> It MIGHT be possible to put the tactile sensor on the 4 boat and with the
> sensor on the top
> boat in the cabinet. I don't see why this wouldn't work actually.
> I know you don't want to hear it, but there are good reasons why many of us
> suggested
> the 18WLS to you based on the modules you wanted. The other option is
> getting one
> 12WLS now and another later.
>
> --tom
>
> --- In 200e@yahoogroups.com, amnesia <amni56@...> wrote:
>>
>> Hi all
>>
>> I havent had an answer to my question as yet. :-(
>>
>> Say I decide to buy a complete 12WLS and a year later a extra 4 boat
>> with the Kin Port. Will I be able to do that. have it all connected? I
>> understand it wont be in the cabinet.
>>
>> Please dont answer saying " dude get a 18WLS" :-)
>>
>> Also the people who own the Kin Port do you find the mass of patch
>> cables get in the way of using an 18WLS?
>>
>> cheers
>> Ross
>>
>
>