200e

2009/8/16 amnesia <amni56@tpg.com.au>:
> dont worry i didnt have the master eq level up for rear

I have made this error thousand times, especially if I am a little
nervous, like at a gig. Once I had a live gig that was part of a live
broadcast on radio and it was very important that everyone started
playing on the second. I was sitting there about 60 seconds before my
start time and the sound engineer wanted a last soundcheck, and my
instrument was silent! I started checking the patch, checking that all
modules worked, checking patchcords, the mixer etc with increasing
panic, with just a few seconds left my eyes went to the top right of
the 227e... master levels down, phew! After that i changed color on
the knob tops of these knobs to red, but i'm not sure it helps  have
done this mistake many times since. The best would be if they were
backlit, with a dimmer so that they were glowing when off and off when
on if you know that I mean.


>
> amnesia wrote:
>>
>>
>> OK
>> Just done this .
>>
>> Put sound that was metering on A B into C D but how do i get metering
>> showing on C D I use my headphones to listen to A out B out and that
>> worked when A B were plugged in, but plus same A B sound into C D and C
>> D output no levels or metering?
>> I have set the headphones to front/rear.
>>
>> ezra buchla wrote:
>> >
>> >
>> > i meant yes, C and D are then routed to the rear channels, each submix
>> > input
>> > letter corresponding to an output letter.
>> >
>> > On Sat, Aug 15, 2009 at 5:02 PM, amnesia <amni56@tpg.com.au
>> <mailto:amni56%40tpg.com.au>
>> > <mailto:amni56%40tpg.com.au>> wrote:
>> >
>> > >
>> > >
>> > > Hi Ezra
>> > >
>> > > Yes In the mix is on, so I can hear A and B but when I plug in
>> sound to
>> > > C and D nothing
>> > >
>> > >
>> > > ezra buchla wrote:
>> > > >
>> > > >
>> > > > "in the mix" is on? then yes
>> > > >
>> > > > On Sat, Aug 15, 2009 at 4:41 PM, cray5656 <amni56@tpg.com.au
>> <mailto:amni56%40tpg.com.au>
>> > <mailto:amni56%40tpg.com.au><amni56%40tpg.com.au>
>> > > > <mailto:amni56%40tpg.com.au <amni56%2540tpg.com.au>>> wrote:
>> > > >
>> > > > >
>> > > > >
>> > > > > Hi all
>> > > > >
>> > > > > Just used the sub mix for the first time today and while A and B
>> > > > work fine
>> > > > > C and D are silent??? Are they sent elsewhere i.e rear?
>> > > > >
>> > > > >
>> > > > >
>> > > >
>> > > > [Non-text portions of this message have been removed]
>> > > >
>> > > >
>> > >
>> > >
>> >
>> > [Non-text portions of this message have been removed]
>> >
>> >
>>
>>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>