200e

ahhh...ok thanks

I have had the AFG for a year now and really only used it a few times.

Ross

dougc356 wrote:
>
> If you want to simply advance on pulse, use the left hand area, using 
> the "stop" setting as I described.
>
> If you want to use the strobed mode stage select in the stage 
> addressing area, you need both a pulse and a cv. Each pulse, the cv is 
> read. The voltage read determines the stage. With this you can combine 
> S&H with quantizer.
>
> Doug
>
> --- In 200e@yahoogroups.com <mailto:200e%40yahoogroups.com>, amnesia 
> <amni56@...> wrote:
> >
> > Do you need to have a pulse in and cv in at the same time ?
> > Or can I just have Pulse in only? I am talking the stage addressing
> > Pulse in only no other pulse in or cv in.
> >
> > Thanks
> >
> > Ross
> >
> >
> >
> > dougc356 wrote:
> > >
> > > Sorry for quality of this question, but you are applying a varying
> > > signal to the "cv in" jack next to the "pulse" jack, right? Also, the
> > > "strobed" light has to be lit.
> > >
> > > I could also be thinking about something completely different. 
> Perhaps
> > > you are talking about the left hand side "start/adv" pulse input. To
> > > use that you must first set all the stages to "stop." At that point a
> > > pulse in on the "start/adv" jack should advance one step.
> > >
> > > Of course if all of the above is old news to you there is always the
> > > chance of hardware/firmware issues. I am on rev15.
> > >
> > > Doug
> > >
> > > --- In 200e@yahoogroups.com <mailto:200e%40yahoogroups.com> 
> <mailto:200e%40yahoogroups.com>, amnesia
> > > <amni56@> wrote:
> > > >
> > > > I am finding the Pulse Stage Addressing has never worked? I have 
> never
> > > > been able to see any stage addressing with just the pulse in?
> > > >
> > > > I assume my firmware is the latest as Ezra had my AFG for a month at
> > > > start of the year.
> > > >
> > > > ross
> > > >
> > > >
> > > >
> > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> >
>
>