200e

oh a lovely surprise and loads of smiles to see you about here again yasi.  ;-]



On Nov 4, 2010, at 2:55 PM, cyaarsoil wrote:

> to add and subtract numbers of pulses,
> make the 250e have a 'retreat' pulse input (as opposed to 'advance'),
> by setting the stage addressing to strobed,
> and patching a CV output to stage adressing CV input,
> and setting the voltage output from each stage to address the stage before. the strobe pulse input then acts as a 'retreat' input.
> 
> then the current stage number is as an accumulator to which 'advance' pulses add and 'retreat' pulses subtract. have used this as a tempo difference meter comparing pulse frequency at 'advance' and 'retreat', and to synthesize signals at the tempo difference frequency.
> 
> many variations
> 
> also seems to suggest a few additions a sequencer might want......
> 
> had thought also of trying 256e in feedback around 266e sample and hold to do the adding and subtracting, but don't have the hardware at hand.
> 
> Yasi Perera
> 
> 



[Non-text portions of this message have been removed]