200e

DAMN - this was good news! I haven't noticed before. This will save me
hours of my life, thank you!

2008/4/10, ringmod45 <ringmod45@yahoo.com>:
>
>  Hi Everyone,
>
>  Speaking of the 250e, here is a tip I gleaned from the manual of the
>  original Model 248 MARF and works perfectly with the 250e. Normally,
>  you use the black edit knob to select a stage, then you press the
>  buttons which correspond to the values and functions you need and on
>  to the next stage to set more values and functions.
>
>  If you want to set a range value of 4-6 volts for the CV 1 output of
>  all 16 stages, simply press and hold down the 4-6 button and turn the
>  edit knob consecutively in one motion around all 16 stages and the 4-6
>  value will be designated to each stage. 16 button presses and 16 edit
>  knobs turns condensed into one button press and one full cycle turn of
>  the edit knob. This is process is usable for every value or function
>  that has a button.
>
>  If you have any other useful and helpful tips, please list them with
>  the Model number and the word tip in the subject header, thanks.
>  Hopefully this will lead to more explorations and possibilities.
>
>  Cheers,
>  RM45
>
>
>
>
>  ------------------------------------
>
>  Yahoo! Groups Links
>
>
>
>