200e

Does anyone know of an inexpensive source for the signal cables used with the Buchla 200e?

There isn't really one, however several people have reported good success with 3.5mm cables as commonly used for the euro format. If you fancy having a dig on Muffs forum, there are a few interesting threads on this topic. Cheers.

Sent from my iPhone

On 24 Feb 2011, at 05:02 PM, "potterpaint2000" <potterpaint2000@yahoo.com> wrote:

> Does anyone know of an inexpensive source for the signal cables used with the Buchla 200e?
> 
> 


[Non-text portions of this message have been removed]

The tinijax cables will not fit in 3.5mm jacks tho, you will damage them.
But you can use the 3.5mm cables in any of the tinijax, the only issue is
since they are slightly smaller, they could be intermittent in tinijax jacks
that have become accustomed to the tinijax cables.  That's how I get by with
only 4 buchla cables, I only have one module that the 3.5mm cables fit a bit
loose.

On Thu, Feb 24, 2011 at 9:08 AM, Rash <rashemirashim@yahoo.com> wrote:

>
>
> There isn't really one, however several people have reported good success
> with 3.5mm cables as commonly used for the euro format. If you fancy having
> a dig on Muffs forum, there are a few interesting threads on this topic.
> Cheers.
>
> Sent from my iPhone
>
>
> On 24 Feb 2011, at 05:02 PM, "potterpaint2000" <potterpaint2000@yahoo.com>
> wrote:
>
> > Does anyone know of an inexpensive source for the signal cables used with
> the Buchla 200e?
> >
> >
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]