50g

>
> --- In 50g@yahoogroups.com, "Gordon Ayres" <gordon.ayres@> wrote:
> >
> > I am a new user on the 50g. Old user other models before the 49+
> > series of calculators.
> > 
> > Using the link kit the instructions seem terse and I am entering a
> > trial and error mode of experimentation to make things work. Old hp 
> 41
> > and hp71 series had seamless ways of saving programs to tape once
> > written but do not have the ability to write on pc and transfer to
> > calculator. However, the manuals and capabilities where clearly 
> given
> > through examples of everything you needed to archive and restore 
> from
> > tape. I know that this calculator has the capability to make 
> transfers
> > form pc text to the calculator and I will eventually get there.
> > 
> > Here is a company that seems to have this under control and sales a 
> CD
> > that will install its programs on the calculator from the CD using 
> the
> > link kit. So I know that the capability must be within my grasp. 
> > 
> > http://www.southforktech.com/sfttools.htm
> > 
> > Is there a good explanation of how to write programs on your PC and
> > how to transfer them efficiently to the calculator?
> > 
> > I have transferred a text file to the stack on the calculator then
> > edited it on the calculator replacing the double left and right
> > programming enunciators with HP enunciators but this is a tedious
> > process and seems I might as well write the programs on the 
> calculator
> > in the first place.
> > 
> > Any ideas or help would be appreciated.
> > 
> > Best regards
> > Gordon Ayres
> >
> 
> I love using Debug4x from http://www.debug4x.com.  It's a free IDE 
> that comes with an emulator (also available separately from 
> http://www.hpcalc.org) that you can test your programs on before 
> transferring to your physical device.  Debug4x now includes User RPL 
> programming (was mainly used to create SysRPL libraries and assembler 
> code before the inclusion of User RPL--the "native" HP programming 
> structure).
> 
> Manjo (the author of the grayscale program OpenFire) has also created 
> a programming environment that's available here:  
> http://fly.srk.fer.hr/~manjo/openfire/
> 
> For detailed programming references, check out the HP49G+ Adanved 
> User's Guide, available at: 
> http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00554621/c005
> 54621.pdf
> 
> Also, the SysRPL programming guide is here:  
> http://www.hpcalc.org/details.php?id=5142
> 
> Enjoy,
> Scott
>

>
> 
> thanks awsome information.
> 
> Best regards
> Gordon
> 
> 
> --- In 50g@yahoogroups.com, "Scott" <blueelectron@> wrote:
> >
> > --- In 50g@yahoogroups.com, "Gordon Ayres" <gordon.ayres@> wrote:
> > >
> > > I am a new user on the 50g. Old user other models before the 49+
> > > series of calculators.
> > > 
> > > Using the link kit the instructions seem terse and I am entering a
> > > trial and error mode of experimentation to make things work. Old hp 
> > 41
> > > and hp71 series had seamless ways of saving programs to tape once
> > > written but do not have the ability to write on pc and transfer to
> > > calculator. However, the manuals and capabilities where clearly 
> > given
> > > through examples of everything you needed to archive and restore 
> > from
> > > tape. I know that this calculator has the capability to make 
> > transfers
> > > form pc text to the calculator and I will eventually get there.
> > > 
> > > Here is a company that seems to have this under control and sales a 
> > CD
> > > that will install its programs on the calculator from the CD using 
> > the
> > > link kit. So I know that the capability must be within my grasp. 
> > > 
> > > http://www.southforktech.com/sfttools.htm
> > > 
> > > Is there a good explanation of how to write programs on your PC and
> > > how to transfer them efficiently to the calculator?
> > > 
> > > I have transferred a text file to the stack on the calculator then
> > > edited it on the calculator replacing the double left and right
> > > programming enunciators with HP enunciators but this is a tedious
> > > process and seems I might as well write the programs on the 
> > calculator
> > > in the first place.
> > > 
> > > Any ideas or help would be appreciated.
> > > 
> > > Best regards
> > > Gordon Ayres
> > >
> > 
> > I love using Debug4x from http://www.debug4x.com.  It's a free IDE 
> > that comes with an emulator (also available separately from 
> > http://www.hpcalc.org) that you can test your programs on before 
> > transferring to your physical device.  Debug4x now includes User RPL 
> > programming (was mainly used to create SysRPL libraries and assembler 
> > code before the inclusion of User RPL--the "native" HP programming 
> > structure).
> > 
> > Manjo (the author of the grayscale program OpenFire) has also created 
> > a programming environment that's available here:  
> > http://fly.srk.fer.hr/~manjo/openfire/
> > 
> > For detailed programming references, check out the HP49G+ Adanved 
> > User's Guide, available at: 
> > http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00554621/c005
> > 54621.pdf
> > 
> > Also, the SysRPL programming guide is here:  
> > http://www.hpcalc.org/details.php?id=5142
> > 
> > Enjoy,
> > Scott
> >
>