The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-04-28 22:40 UTC

Message

Re: [AN1x-list] Beeps at power up

2000-04-01 by Marco Poloz

Hi
I also get a similar problem. I've noticed when I boot my An1x up and both
the scenes are on loud blips come out, when I turn a scene off it goes away,
but If I turn both scenes back on It chirps again till it warms up, and the
go away.
I also notice that If I had a pad type sound on the keys and held a chord,
the bllep seem to preceed the re-trigerring of the sound.

Did any of this make sense?

Poloz

rlsnuffy@... wrote:

> From: rlsnuffy@...
>
> Hello All,
>
> I just acquired an AN1x last week - I've noticed a couple things that
> don't seem quite right with it:
>
> 1) The LEDs blink/change brilliance a good bit when the sequencer or
> arpeggiator are at work.
>
> 2) When I first power it up from cold I get some random chirps from
> it.  Maybe 2 or 3 in a 5 or 10 second period, then all is normal.
> And it doesn't do it if it's only been shut off for a few seconds.
>
> Is this normal?  It doesn't sound like it, but what do I know...
>
> Thanks,
>
> Bob
>
> ------------------------------------------------------------------------
> Get a NextCard Visa, in 30 seconds!
> 1. Fill in the brief application
> 2. Receive approval decision within 30 seconds
> 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
> Apply NOW!
> http://click.egroups.com/1/2646/4/_/663009/_/954304100/
> ------------------------------------------------------------------------
>
> Community email addresses:
>   Post message: AN1x-list@onelist.com
>   Subscribe:    AN1x-list-subscribe@onelist.com
>   Unsubscribe:  AN1x-list-unsubscribe@onelist.com
>   List owner:   AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/AN1x-list

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.