The Yamaha AN1x Synthesizer mailing list

Ok, what happens if you don't, just wondering, not being picky!
I have checked the manual for the Peavey and it is auto sensing on power
up, So no cutting my tip or soldering my ring!  The peavey is has 2
holes for CV/F.switch as well if the roland won't take either.

The roland keyboard doesn't have aftertouch, I don't really know exactly
how aftertouch works, If it's on a per note basis then a foot pedal of
any type isn't really going to help me there I think!


In article <5.0.2.1.2.20010220172421.00a0a040@...>,
Bruce Wahler <bruce@...> writes
>Reggie,
>
>>Would using it for after touch be viable?
>
>You can set the pedal to mimic aftertouch, but bear in mind that the 
>regular aftertouch will still operate.  Maybe this is what you want, but if 
>you're doing it because you don't like the feel of aftertouch, you'll still 
>have to deal with it.
>
>One more thing:  There are TWO different standards for a "wah" type pedal 
>with a stereo (TRS) cable, Yamaha's way, and the rest of the world. (OK, a 
>few KORG devices like the new CX-3 use the Yamaha convention, too, but 
>that's probably because Yamaha now owns 30% of KORG.)  If you want to use a 
>Yamaha pedal like the FC-7 with a Roland keyboard, you have to cut the plug 
>off, and put a new one on, reversing the 'tip' and 'ring' connections.  For 
>those who care --
>
>                 Yamaha  Others
>
>Tip             Power           Wiper
>Ring            Wiper           Power
>Sleeve  Ground          Ground
>
>
>Regards,
>
>-BW
>
>--
>Bruce Wahler
>Design Consultant
>Ashby Solutions"
>www.ashbysolutions.com
>CloneWheel Support Group moderator
>978.386.7389  voice
>978.776.0096  fax
>bruce@...
>
>
>
>Community email addresses:
>  Post message: AN1x-list@onelist.com
>  Subscribe:    AN1x-list-subscribe@onelist.com
>  Unsubscribe:  AN1x-list-unsubscribe@onelist.com
>  List owner:   AN1x-list-owner@onelist.com
>
>Shortcut URL to this page:
>  http://www.onelist.com/community/AN1x-list
>

See ya,

Reggie