The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "deadlines777" <housin666@h...> 
wrote:
>
> Hi i was wondering if its possible to dump a scene into another 
scene 
> of a different voice, so i could then split the keyboard and play 
these 
> 2 patches together.. i checked the manual, i only found bulk dump.
>

From the Tips & Tricks directory in the Files section here at Yahoo! 
Groups, this was written up by Gary some time back:

You can perform this operation at the synth using the SCENE LOAD 
function (see p22 of the manual.)

Scene Load Function
Hold [SCENE 1] (or [SCENE 2] and enter the number of the voice whose 
Scene data you want to copy. The selected voice number flashes in 
the LCD. 

Press [YES/ENTER] to execute the Scene Load operation, or [NO] to 
cancel it. 


Scene Swap Function
Hold [STORE] and press both [SCENE 1] and [SCENE 2] switches. "SURE?
[Y/N]" FLASHES IN THE LCD 

Press [YES/ENTER] to execute the Scene Swap operation, or [NO] to 
cancel it. 


Alternatively if you are using AN1xEdit: double click the source 
voice in the library so that it becomes the current edit voice. Then 
select any control in the source scene and use the Edit menu copy 
option. Now load up the target voice from the library and select any 
control in the destination scene - then choose the Edit menu Paste 
Scene option.



Creating a keyboard split is simple enough, use the Layer Mode to 
create a SPLIT - you can then use the Scene Swap function if 
necessary to place whichever sound you require to the left or right 
of the scene split.


HTH

Jon