The Yamaha AN1x Synthesizer mailing list

Hi guys...new to the group....The issue is that my sustain pedal does not work with the 
an1x...I suspect it must be a polarity issue...however I don't seem to be able to find the 
polarity section in the an1x in order to change it.....Any ideas?...thank you...spiramus

--- In AN1x-list@yahoogroups.com, "spiramus2006" <spiramus2006@...> 
wrote:
>
> Hi guys...new to the group....The issue is that my sustain pedal 
does not work with the 
> an1x...I suspect it must be a polarity issue...however I don't seem 
to be able to find the 
> polarity section in the an1x in order to change it.....Any 
ideas?...thank you...spiramus
>

There is no polarity setting on the AN1x :-(

Double check a) you have the pedal plugged into the right jack and b) 
the FS and FC settings under Utility Control are set accordingly. 
Don't recall the default settings off the top of my head, will double 
check later...

Otherwise you are probably right and the polarity of your pedal does 
not match the AN1x.


Jon

--- In AN1x-list@yahoogroups.com, "Jon" <jondl_2000@...> wrote:
>
> --- In AN1x-list@yahoogroups.com, "spiramus2006" <spiramus2006@> 
> wrote:
> >
> > Hi guys...new to the group....The issue is that my sustain pedal 
> does not work with the 
> > an1x...I suspect it must be a polarity issue...however I don't seem 
> to be able to find the 
> > polarity section in the an1x in order to change it.....Any 
> ideas?...thank you...spiramus
> >
> 
> There is no polarity setting on the AN1x :-(
> 
> Double check a) you have the pedal plugged into the right jack and b) 
> the FS and FC settings under Utility Control are set accordingly. 
> Don't recall the default settings off the top of my head, will double 
> check later...
> 
> Otherwise you are probably right and the polarity of your pedal does 
> not match the AN1x.

Follow up to previous post: FC = MIDI CC 4, FS = MIDI CC 64  These cab be altered 
using the Ctrl device and Ctrl No under UTILITY/SETUP

Jon

Jon a \ufffdcrit :

>--- In AN1x-list@yahoogroups.com, "spiramus2006" <spiramus2006@...> 
>wrote:
>  
>
>>Hi guys...new to the group....The issue is that my sustain pedal 
>>    
>>
>does not work with the 
>  
>
>>an1x...I suspect it must be a polarity issue...however I don't seem 
>>    
>>
>to be able to find the 
>  
>
>>polarity section in the an1x in order to change it.....Any 
>>    
>>
>ideas?...thank you...spiramus
>  
>
>
>There is no polarity setting on the AN1x :-(
>
>Double check a) you have the pedal plugged into the right jack and b) 
>the FS and FC settings under Utility Control are set accordingly. 
>Don't recall the default settings off the top of my head, will double 
>check later...
>
>Otherwise you are probably right and the polarity of your pedal does 
>not match the AN1x.
>
>
>Jon
>
Hello !
if i remember well the contact inside the pedal must be a "normally 
closed" model .... Check if the tip and the body of the jack are shorted 
when you don't push the pedal and open when pushing. On some universal 
pedal models (not the factory one) you can choose either "normally 
closed" or "normally open" contact inside the pedal .
Cheers!
J.F.

>
>
>
>
>Community email addresses:
>  Post message: AN1x-list@yahoogroups.com
>  Subscribe:    AN1x-list-subscribe@yahoogroups.com
>  Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
>  List owner:   AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
>   http://groups.yahoo.com/group/AN1x-list
>
>The AN1x Control Synthesizer FAQ::
>  http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
> 
>Yahoo! Groups Links
>
>
>
>
>---------------------------------------------------------------------------------------
>Orange vous informe que cet  e-mail a ete controle par l'anti-virus mail. 
>Aucun virus connu a ce jour par nos services n'a ete detecte.
>
>
>
>
>
>---
>avast! Antivirus: message Entrant propre.
>Base de donn\ufffdes des virus (VPS): 0641-3, 12/10/2006
>Test du: 12/10/2006 22:32:51
>avast! - copyright (c) 2000-2006 ALWIL Software.
>http://www.avast.com
>
>
>
>
>  
>




---
avast! Antivirus: message Sortant propre.
Base de donn\ufffdes des virus (VPS): 0641-3, 12/10/2006
Test du: 12/10/2006 23:15:56
avast! - copyright (c) 2000-2006 ALWIL Software.
http://www.avast.com