does anyone know what units the LFO speeds are?
2001-02-15 by Reggie
Hello all, does anyone know what they are? Are they in Hz? TIA. -- Reggie
Thread
does anyone know what units the LFO speeds are?
Re: does anyone know what units the LFO speeds are?
2001-02-16 by jondl@jdlx-musique.com
Hi Reg, In case you missed it - we just had this discussion about a week - two weeks - ago and nobody has the answer as to what the LFO Speed values equate to in Hz. Not even Gary. Yamaha did not (would not?) provide him that info when he made AN1xEdit. I emailed Yamaha Customer Assistance last week asking them this very same question. I got a reply that my question had been passed along to Yamaha Japan and YCA would get back to me when the have a response from Japan. So there you have it. ;-) regards, Jon --- In AN1x-list@y..., Reggie <reggie@t...> wrote:
Show quoted textHide quoted text
> Hello all, does anyone know what they are? Are they in Hz? > > TIA. > -- > Reggie
Re: [AN1x-list] Re: does anyone know what units the LFO speeds are?
2001-02-16 by Reggie
Sorry bout that John, I didn't miss the thread, I just forgot about it while I was in the middle of something else. So nobody knows. B#gger!! In article <96i2vg+ik7o@...>, jondl@... writes >Hi Reg, >In case you missed it - we just had this discussion about a week - two >weeks - ago and nobody has the answer as to what the LFO Speed values >equate to in Hz. Not even Gary. Yamaha did not (would not?) provide him >that info when he made AN1xEdit. I emailed Yamaha Customer Assistance >last week asking them this very same question. I got a reply that my >question had been passed along to Yamaha Japan and YCA would get back >to me when the have a response from Japan. > >So there you have it. ;-) > >regards, >Jon > >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >> Hello all, does anyone know what they are? Are they in Hz? >> >> TIA. >> -- >> Reggie > > > > >Community email addresses: > Post message: AN1x-list@onelist.com > Subscribe: AN1x-list-subscribe@onelist.com > Unsubscribe: AN1x-list-unsubscribe@onelist.com > List owner: AN1x-list-owner@onelist.com > >Shortcut URL to this page: > http://www.onelist.com/community/AN1x-list > See ya, Reggie
Re: does anyone know what units the LFO speeds are?
2001-02-16 by jondl@jdlx-musique.com
Nothing to be sorry about, Reggie...I wonder how/if Yamaha Japan will repy to my question? If they couldn't provide the data to a guy they contracted why would they give it to "Joe User" ;-) YCA has been pretty good to me up until now so we'll wait and see. Jon --- In AN1x-list@y..., Reggie <reggie@t...> wrote: > Sorry bout that John, I didn't miss the thread, I just forgot about it > while I was in the middle of something else. > > So nobody knows. B#gger!! > > > > > > > In article <96i2vg+ik7o@e...>, jondl@j... writes > >Hi Reg, > >In case you missed it - we just had this discussion about a week - two > >weeks - ago and nobody has the answer as to what the LFO Speed values > >equate to in Hz. Not even Gary. Yamaha did not (would not?) provide him > >that info when he made AN1xEdit. I emailed Yamaha Customer Assistance > >last week asking them this very same question. I got a reply that my > >question had been passed along to Yamaha Japan and YCA would get back
Show quoted textHide quoted text
> >to me when the have a response from Japan. > > > >So there you have it. ;-) > > > >regards, > >Jon > > > >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: > >> Hello all, does anyone know what they are? Are they in Hz? > >> > >> TIA. > >> -- > >> Reggie > > > > > > > > > >Community email addresses: > > Post message: AN1x-list@onelist.com > > Subscribe: AN1x-list-subscribe@onelist.com > > Unsubscribe: AN1x-list-unsubscribe@onelist.com > > List owner: AN1x-list-owner@onelist.com > > > >Shortcut URL to this page: > > http://www.onelist.com/community/AN1x-list > > > > See ya, > > Reggie
Re: [AN1x-list] Re: does anyone know what units the LFO speeds are?
2001-02-16 by Reggie
Is there a way we could figure it out what it was for ourselves? In article <96jhj3+5t7m@...>, jondl@... writes >Nothing to be sorry about, Reggie...I wonder how/if Yamaha Japan will >repy to my question? If they couldn't provide the data to a guy they >contracted why would they give it to "Joe User" ;-) YCA has been >pretty good to me up until now so we'll wait and see. > >Jon > >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >> Sorry bout that John, I didn't miss the thread, I just forgot about >it >> while I was in the middle of something else. >> >> So nobody knows. B#gger!! >> >> >> >> >> >> >> In article <96i2vg+ik7o@e...>, jondl@j... writes >> >Hi Reg, >> >In case you missed it - we just had this discussion about a week - >two >> >weeks - ago and nobody has the answer as to what the LFO Speed >values >> >equate to in Hz. Not even Gary. Yamaha did not (would not?) >provide him >> >that info when he made AN1xEdit. I emailed Yamaha Customer >Assistance >> >last week asking them this very same question. I got a reply that >my >> >question had been passed along to Yamaha Japan and YCA would get >back >> >to me when the have a response from Japan. >> > >> >So there you have it. ;-) >> > >> >regards, >> >Jon >> > >> >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >> >> Hello all, does anyone know what they are? Are they in Hz? >> >> >> >> TIA. >> >> -- >> >> Reggie >> > >> > >> > >> > >> >Community email addresses: >> > Post message: AN1x-list@onelist.com >> > Subscribe: AN1x-list-subscribe@onelist.com >> > Unsubscribe: AN1x-list-unsubscribe@onelist.com >> > List owner: AN1x-list-owner@onelist.com >> > >> >Shortcut URL to this page: >> > http://www.onelist.com/community/AN1x-list >> > >> >> See ya, >> >> Reggie > > > >Community email addresses: > Post message: AN1x-list@onelist.com > Subscribe: AN1x-list-subscribe@onelist.com > Unsubscribe: AN1x-list-unsubscribe@onelist.com > List owner: AN1x-list-owner@onelist.com > >Shortcut URL to this page: > http://www.onelist.com/community/AN1x-list > See ya, Reggie
Re: does anyone know what units the LFO speeds are?
2001-02-17 by jondl@jdlx-musique.com
I honestly don't know to go about that?! I'd incorrectly assumed the LFO table in the Data List could be applied to the LFO Speed - but as Gary pointed out this table relates to the LFO values for the FX parameters. I downloaded a copy of the PDF for the A3000 (because I have no life ;-) and that shows the LFO Speed values in Hz for the A3K. You can get it from the Yamaha U.K. site. But that table only displays 64 possible values - and while it in the 'neighborhood' of the values in the AN1x data list LFO table the values quickly diverge from any ratio I can figure out. Any mathematicians on the list want to try? Jon --- In AN1x-list@y..., Reggie <reggie@t...> wrote:
Show quoted textHide quoted text
> Is there a way we could figure it out what it was for ourselves? > > > In article <96jhj3+5t7m@e...>, jondl@j... writes > >Nothing to be sorry about, Reggie...I wonder how/if Yamaha Japan will > >repy to my question? If they couldn't provide the data to a guy they > >contracted why would they give it to "Joe User" ;-) YCA has been > >pretty good to me up until now so we'll wait and see. > > > >Jon > > > >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: > >> Sorry bout that John, I didn't miss the thread, I just forgot about > >it > >> while I was in the middle of something else. > >> > >> So nobody knows. B#gger!! > >> > >> > >> > >> > >> > >> > >> In article <96i2vg+ik7o@e...>, jondl@j... writes > >> >Hi Reg, > >> >In case you missed it - we just had this discussion about a week - > >two > >> >weeks - ago and nobody has the answer as to what the LFO Speed > >values > >> >equate to in Hz. Not even Gary. Yamaha did not (would not?) > >provide him > >> >that info when he made AN1xEdit. I emailed Yamaha Customer > >Assistance > >> >last week asking them this very same question. I got a reply that > >my > >> >question had been passed along to Yamaha Japan and YCA would get > >back > >> >to me when the have a response from Japan. > >> > > >> >So there you have it. ;-) > >> > > >> >regards, > >> >Jon > >> > > >> >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: > >> >> Hello all, does anyone know what they are? Are they in Hz? > >> >> > >> >> TIA. > >> >> -- > >> >> Reggie > >> > > >> > > >> > > >> > > >> >Community email addresses: > >> > Post message: AN1x-list@onelist.com > >> > Subscribe: AN1x-list-subscribe@onelist.com > >> > Unsubscribe: AN1x-list-unsubscribe@onelist.com > >> > List owner: AN1x-list-owner@onelist.com > >> > > >> >Shortcut URL to this page: > >> > http://www.onelist.com/community/AN1x-list > >> > > >> > >> See ya, > >> > >> Reggie > > > > > > > >Community email addresses: > > Post message: AN1x-list@onelist.com > > Subscribe: AN1x-list-subscribe@onelist.com > > Unsubscribe: AN1x-list-unsubscribe@onelist.com > > List owner: AN1x-list-owner@onelist.com > > > >Shortcut URL to this page: > > http://www.onelist.com/community/AN1x-list > > > > See ya, > > Reggie
Re: [AN1x-list] Re: does anyone know what units the LFO speeds are?
2001-02-17 by Reggie
Well, I had a little think about this, the LFO value can be anything from 0 to FF (hex) or 0 to 255 (decimal). I usually try and lock it to what ever tempo I'm working in or divisions/multiples of depending on the type of noise, this appears to work for a while, but it does lose sync after a bit. That could be down to the sequencer though. The best thing to do would be to set the LFO rate, then have a noise that you can hear the LFO on and measure how many cycles you get in a second or in the time it would take a bar at the tempo of LFO i.e. if LFO = 180 then tempo = 180. If you get 4 cycles in the bar length then it is BPM, if not you can at least work out the Hz by measuring the cycles (Peak to Peak when looking at the wave in Soundforge) per second. It is probably neither but a Table instead, but at least we can narrow it down by finding out what it isn't!! I hope this all makes sense. I'll have a look at this over the weekend sometime, probably Saturday night. I'm using a PLG AN, but that shouldn't make a difference. In article <96kg9u+ruj0@...>, jondl@... writes >I honestly don't know to go about that?! > >I'd incorrectly assumed the LFO table in the Data List could be applied >to the LFO Speed - but as Gary pointed out this table relates to the >LFO values for the FX parameters. I downloaded a copy of the PDF for >the A3000 (because I have no life ;-) and that shows the LFO Speed >values in Hz for the A3K. You can get it from the Yamaha U.K. site. But >that table only displays 64 possible values - and while it in the >'neighborhood' of the values in the AN1x data list LFO table the values >quickly diverge from any ratio I can figure out. Any mathematicians on >the list want to try? > >Jon > >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >> Is there a way we could figure it out what it was for ourselves? >> >> >> In article <96jhj3+5t7m@e...>, jondl@j... writes >> >Nothing to be sorry about, Reggie...I wonder how/if Yamaha Japan will >> >repy to my question? If they couldn't provide the data to a guy they >> >contracted why would they give it to "Joe User" ;-) YCA has been >> >pretty good to me up until now so we'll wait and see. >> > >> >Jon >> > >> >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >> >> Sorry bout that John, I didn't miss the thread, I just forgot about >> >it >> >> while I was in the middle of something else. >> >> >> >> So nobody knows. B#gger!! >> >> >> >> >> >> >> >> >> >> >> >> >> >> In article <96i2vg+ik7o@e...>, jondl@j... writes >> >> >Hi Reg, >> >> >In case you missed it - we just had this discussion about a week - >> >two >> >> >weeks - ago and nobody has the answer as to what the LFO Speed >> >values >> >> >equate to in Hz. Not even Gary. Yamaha did not (would not?) >> >provide him >> >> >that info when he made AN1xEdit. I emailed Yamaha Customer >> >Assistance >> >> >last week asking them this very same question. I got a reply that >> >my >> >> >question had been passed along to Yamaha Japan and YCA would get >> >back >> >> >to me when the have a response from Japan. >> >> > >> >> >So there you have it. ;-) >> >> > >> >> >regards, >> >> >Jon >> >> > >> >> >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >> >> >> Hello all, does anyone know what they are? Are they in Hz? >> >> >> >> >> >> TIA. >> >> >> -- >> >> >> Reggie >> >> > >> >> > >> >> > >> >> > >> >> >Community email addresses: >> >> > Post message: AN1x-list@onelist.com >> >> > Subscribe: AN1x-list-subscribe@onelist.com >> >> > Unsubscribe: AN1x-list-unsubscribe@onelist.com >> >> > List owner: AN1x-list-owner@onelist.com >> >> > >> >> >Shortcut URL to this page: >> >> > http://www.onelist.com/community/AN1x-list >> >> > >> >> >> >> See ya, >> >> >> >> Reggie >> > >> > >> > >> >Community email addresses: >> > Post message: AN1x-list@onelist.com >> > Subscribe: AN1x-list-subscribe@onelist.com >> > Unsubscribe: AN1x-list-unsubscribe@onelist.com >> > List owner: AN1x-list-owner@onelist.com >> > >> >Shortcut URL to this page: >> > http://www.onelist.com/community/AN1x-list >> > >> >> See ya, >> >> Reggie > > > > >Community email addresses: > Post message: AN1x-list@onelist.com > Subscribe: AN1x-list-subscribe@onelist.com > Unsubscribe: AN1x-list-unsubscribe@onelist.com > List owner: AN1x-list-owner@onelist.com > >Shortcut URL to this page: > http://www.onelist.com/community/AN1x-list > See ya, Reggie
RE: [AN1x-list] Re: does anyone know what units the LFO speeds are?
2001-02-18 by Aireq
Yes you would just need an oscilloscope I would assume. aireq
Show quoted textHide quoted text
-----Original Message----- From: Reggie [mailto:reggie@...] Sent: Friday, February 16, 2001 9:20 AM To: AN1x-list@yahoogroups.com Subject: Re: [AN1x-list] Re: does anyone know what units the LFO speeds are? Is there a way we could figure it out what it was for ourselves? In article <96jhj3+5t7m@...>, jondl@... writes >Nothing to be sorry about, Reggie...I wonder how/if Yamaha Japan will >repy to my question? If they couldn't provide the data to a guy they >contracted why would they give it to "Joe User" ;-) YCA has been >pretty good to me up until now so we'll wait and see. > >Jon > >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >> Sorry bout that John, I didn't miss the thread, I just forgot about >it >> while I was in the middle of something else. >> >> So nobody knows. B#gger!! >> >> >> >> >> >> >> In article <96i2vg+ik7o@e...>, jondl@j... writes >> >Hi Reg, >> >In case you missed it - we just had this discussion about a week - >two >> >weeks - ago and nobody has the answer as to what the LFO Speed >values >> >equate to in Hz. Not even Gary. Yamaha did not (would not?) >provide him >> >that info when he made AN1xEdit. I emailed Yamaha Customer >Assistance >> >last week asking them this very same question. I got a reply that >my >> >question had been passed along to Yamaha Japan and YCA would get >back >> >to me when the have a response from Japan. >> > >> >So there you have it. ;-) >> > >> >regards, >> >Jon >> > >> >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >> >> Hello all, does anyone know what they are? Are they in Hz? >> >> >> >> TIA. >> >> -- >> >> Reggie >> > >> > >> > >> > >> >Community email addresses: >> > Post message: AN1x-list@onelist.com >> > Subscribe: AN1x-list-subscribe@onelist.com >> > Unsubscribe: AN1x-list-unsubscribe@onelist.com >> > List owner: AN1x-list-owner@onelist.com >> > >> >Shortcut URL to this page: >> > http://www.onelist.com/community/AN1x-list >> > >> >> See ya, >> >> Reggie > > > >Community email addresses: > Post message: AN1x-list@onelist.com > Subscribe: AN1x-list-subscribe@onelist.com > Unsubscribe: AN1x-list-unsubscribe@onelist.com > List owner: AN1x-list-owner@onelist.com > >Shortcut URL to this page: > http://www.onelist.com/community/AN1x-list > See ya, Reggie Community email addresses: Post message: AN1x-list@onelist.com Subscribe: AN1x-list-subscribe@onelist.com Unsubscribe: AN1x-list-unsubscribe@onelist.com List owner: AN1x-list-owner@onelist.com Shortcut URL to this page: http://www.onelist.com/community/AN1x-list
Re: [AN1x-list] Re: does anyone know what units the LFO speeds are?
2001-02-18 by Reggie
That's cool, MY mate's got one, He said he'll have a look, he's got a PLG AN as well, so he'll let me know in the week. In article <AGECKIIAFCHLHPCMIJEKGELJCPAA.aireq@...>, Aireq <aireq@...> writes >Yes you would just need an oscilloscope I would assume. > >aireq > >-----Original Message----- >From: Reggie [mailto:reggie@...] >Sent: Friday, February 16, 2001 9:20 AM >To: AN1x-list@yahoogroups.com >Subject: Re: [AN1x-list] Re: does anyone know what units the LFO speeds >are? > > >Is there a way we could figure it out what it was for ourselves? > > >In article <96jhj3+5t7m@...>, jondl@... writes >>Nothing to be sorry about, Reggie...I wonder how/if Yamaha Japan will >>repy to my question? If they couldn't provide the data to a guy they >>contracted why would they give it to "Joe User" ;-) YCA has been >>pretty good to me up until now so we'll wait and see. >> >>Jon >> >>--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >>> Sorry bout that John, I didn't miss the thread, I just forgot about >>it >>> while I was in the middle of something else. >>> >>> So nobody knows. B#gger!! >>> >>> >>> >>> >>> >>> >>> In article <96i2vg+ik7o@e...>, jondl@j... writes >>> >Hi Reg, >>> >In case you missed it - we just had this discussion about a week - >>two >>> >weeks - ago and nobody has the answer as to what the LFO Speed >>values >>> >equate to in Hz. Not even Gary. Yamaha did not (would not?) >>provide him >>> >that info when he made AN1xEdit. I emailed Yamaha Customer >>Assistance >>> >last week asking them this very same question. I got a reply that >>my >>> >question had been passed along to Yamaha Japan and YCA would get >>back >>> >to me when the have a response from Japan. >>> > >>> >So there you have it. ;-) >>> > >>> >regards, >>> >Jon >>> > >>> >--- In AN1x-list@y..., Reggie <reggie@t...> wrote: >>> >> Hello all, does anyone know what they are? Are they in Hz? >>> >> >>> >> TIA. >>> >> -- >>> >> Reggie >>> > >>> > >>> > >>> > >>> >Community email addresses: >>> > Post message: AN1x-list@onelist.com >>> > Subscribe: AN1x-list-subscribe@onelist.com >>> > Unsubscribe: AN1x-list-unsubscribe@onelist.com >>> > List owner: AN1x-list-owner@onelist.com >>> > >>> >Shortcut URL to this page: >>> > http://www.onelist.com/community/AN1x-list >>> > >>> >>> See ya, >>> >>> Reggie >> >> >> >>Community email addresses: >> Post message: AN1x-list@onelist.com >> Subscribe: AN1x-list-subscribe@onelist.com >> Unsubscribe: AN1x-list-unsubscribe@onelist.com >> List owner: AN1x-list-owner@onelist.com >> >>Shortcut URL to this page: >> http://www.onelist.com/community/AN1x-list >> > >See ya, > >Reggie > > >Community email addresses: > Post message: AN1x-list@onelist.com > Subscribe: AN1x-list-subscribe@onelist.com > Unsubscribe: AN1x-list-unsubscribe@onelist.com > List owner: AN1x-list-owner@onelist.com > >Shortcut URL to this page: > http://www.onelist.com/community/AN1x-list > > > >Community email addresses: > Post message: AN1x-list@onelist.com > Subscribe: AN1x-list-subscribe@onelist.com > Unsubscribe: AN1x-list-unsubscribe@onelist.com > List owner: AN1x-list-owner@onelist.com > >Shortcut URL to this page: > http://www.onelist.com/community/AN1x-list > See ya, Reggie