The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-04-28 22:40 UTC

Thread

Re: [AN1x] An200 questions

Re: [AN1x] An200 questions

2003-02-18 by DMANX@talk21.com

Hi you need to download the xp update fot xgworks from yamaha downloads page.
The problem I found is that if you use another sequencer then it will be a problem running xgworks together. Unles you use 2 pc's.You can use an1xedit but you will not be able to use the an200 to its full capacity.
However I bought the an200/dx200 and sent them back, because I was not impresd by its output quality. Both units and the sw1000 + plugstation are being discontinued.However it is a good groove box for DJ'S. If I had the money I would go for an Access virus...best analog synth ever made!
Im getting fed up of lack of improvements on yamaha audio cards and synths.
Regards
DMANX

Regards
Dmanx.
> Hallo!
>I'm new on this list. I'm from Italy.
>
>I bought yesterday an an200... and I already have two problems..
>I red some past topics but I still haven't found an answer...
>I hope you will be so kind to help me.
>
>1) The editor I have in the cd needs XGworks... that doesn't work
>with XP... What can I do ? 
>Is An1x edit the only software I can use with XP to edit my an200?
>Shall I set some parameters to make it work with an200 ?
>
>2) I used an an1x two years ago... I made some sounds I loved.
>I still have the .mid with the dump.
>I tried to load the dump in An1xEdit and it crashed!!! Any tips ?
>
>Thanks for your answers!!!
>
>Marco
>
>
>Community email addresses:
>  Post message: AN1x-list@yahoogroups.com
>  Subscribe:    AN1x-list-subscribe@yahoogroups.com
>  Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
>  List owner:   AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
>   <a Target='_new' Href='http://talk21.btopenworld.com/redirect.html?http://groups.yahoo.com/group/AN1x-list'>http://groups.yahoo.com/group/AN1x-list</a>
> 
>
>Your use of Yahoo! Groups is subject to <a Target='_new' Href='http://talk21.btopenworld.com/redirect.html?http://docs.yahoo.com/info/terms/'>http://docs.yahoo.com/info/terms/</a>



--------------------
talk21 your FREE portable and private address on the net at http://www.talk21.com

Re: [AN1x] An200 questions

2003-02-18 by RayMaxer

I'd advise using An1xEdit for all editing..
Using some other sequencer which you normally never use (XGworks) and an
editor for it is .. not very ergonomic.. and An1x-edit is one of the best
user interfaces for editing I've ever seen (IMHO).
It should work fine and covers all the params of your AN200..
As for the second question , I 'm not sure why it crashes Editor, but you
should see AN200 manuals and see if it's compatible in some way of recieving
sysex dumps (patches) of AN-1x ..
If yes, then just try sending it from midi sequencer to AN200.

Ray.

----- Original Message -----
Show quoted textHide quoted text
From: <marcoyyz@...>
To: <AN1x-list@yahoogroups.com>
Sent: Tuesday, February 18, 2003 8:16 PM
Subject: [AN1x] An200 questions

> Hallo!
> I'm new on this list. I'm from Italy.
>
> I bought yesterday an an200... and I already have two problems..
> I red some past topics but I still haven't found an answer...
> I hope you will be so kind to help me.
>
> 1) The editor I have in the cd needs XGworks... that doesn't work
> with XP... What can I do ?
> Is An1x edit the only software I can use with XP to edit my an200?
> Shall I set some parameters to make it work with an200 ?
>
> 2) I used an an1x two years ago... I made some sounds I loved.
> I still have the .mid with the dump.
> I tried to load the dump in An1xEdit and it crashed!!! Any tips ?
>
> Thanks for your answers!!!
>
> Marco

Re: [AN1x] An200 questions

2003-02-18 by RayMaxer

Ops, sorry..
It won't cover all the stuff in An200 of course.. forgot all that drum stuff
it has..

Ray.

Re: [AN1x] An200 questions

2003-02-18 by RayMaxer

> Hi you need to download the xp update fot xgworks from yamaha downloads
page.
> The problem I found is that if you use another sequencer then it will be a
problem running xgworks together. Unles you use 2 pc's.You can use an1xedit
but you will not be able to use the an200 to its full capacity.
> However I bought the an200/dx200 and sent them back, because I was not
impresd by its output quality. Both units and the sw1000 + plugstation are
being discontinued.However it is a good groove box for DJ'S. If I had the
money I would go for an Access virus...best analog synth ever made!
> Im getting fed up of lack of improvements on yamaha audio cards and
synths.
> Regards
> DMANX

Modern midi interfaces have multi-client drivers, so , in fact, running some
editor from some other sequencer is possible while having another sequencer
running all the stuff on those interfaces.. (f.e. Midiman interfaces have
multi-client drivers).
've got Virus b here too and , yeah, it has more extended synthesis.. and
may be covers more 'synth characters'..
but An-1x character is somehow 'closer' to me.. maybe it's because I've got
my AN1x longer than virus, but I somehow love it a bit more, I think :-)
Free EG and Feedback of AN-1x are one of 'jewels' virus lacks.. feedback is
just one parameter but it allows changing the whole sound of synth often on
AN..

[IMHO]

Ray.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.