AVR-Chat

But, if you DON'T do that, is your code recognized?

Jim
On Feb 15, 2008, at 4:35 AM, Tom wrote:

> Jim: Yes, I forgot to mention that. I did that deliberately. The
> assembler is NOT noticing that!
>
> avrFreak
>
> James Wagner wrote:
> >
> > There are two START labels!
> >
> > Jim
> >
> > On Feb 14, 2008, at 2:11 PM, Tom wrote:
> >
> > > I am confounded and flummoxed. I have an assembly program I am
> > > attempting to build in AVRStudio, but the assembler is ignoring my
> > > code. I don't get it. I have compared it to other code I have  
> which
> > > assembles just fine, and can find no difference which explains  
> this
> > > behaviour. The editor is highlighting syntax appropriately, so I  
> am
> > > lost:
> > >
> > > include "tn25def.inc"
> > >
> > > ;
> > > ; interrupt table
> > > ;
> > >
> > > org 0 ; starting address
> > >
> > > START:
> > > INT0: rjmp DUMMY ; external Interrupt 0
> > > PCIO: rjmp DUMMY ; pin change interrupt 0
> > > OC1A: rjmp DUMMY ; timer/counter 1 mompare match 1A
> > > OVF1: rjmp DUMMY ; timer/counter 1 overflow
> > > OVF0: rjmp DUMMY ; timer/counter 0 overflow
> > > ERDY: rjmp DUMMY ; EEPROM ready interrupt
> > > ACI: rjmp DUMMY ; Analog comparator interrupt
> > > ADCC: rjmp DUMMY ; ADC conversion ready interrupt
> > > OC1B: rjmp DUMMY ; timer/counter 1 compare match B
> > > OC0A: rjmp DUMMY ; timer/counter 0 ocmpare match A
> > > OC0B: rjmp DUMMY ; timer/counter 0 compare match B
> > > WDT: rjmp DUMMY ; watchdog timer interrupt
> > > USI_START: rjmp DUMMY ; USI start interrupt
> > > USI_OVF: rjmp DUMMY ; USI overflow interrupt
> > >
> > > ;
> > > ; end interrupt table
> > > ;
> > >
> > > ;
> > > ; constant defintions
> > > ;
> > >
> > > equ TRUE = 0xff
> > > equ FALSE = !TRUE
> > > equ DIV = 0x28 ; divisor for timer readings
> > >
> > > START:
> > >
> > > ldi SPL, SRAM_START ; load stack pointer
> > >
> > > SO, what am I doing wrong? Assembler says the source file is empty
> > > (??)
> > >
> >
>
>
> 



[Non-text portions of this message have been removed]