AVR-Chat

--- In AVR-Chat@yahoogroups.com, Lee <lde99881@...> wrote:
> Yes RAMPZ is used in the ATMEga128 and I have
> previously tried setting that before "call"ing
The RAMPZ register is only used for the elpm instruction.  The EIND 
register is used for eicall/eijmp instructions, both are available 
only on devices with more thatn 128K bytes of Flash.  I don't 
remember if you said which device you're using but if it has more 
than 128K bytes of flash you'll need to use eicall to call your 
bootloader dispatch table entries.

> I used "call" rather then jmp, because I need to
> return to the application program.
I suspected so.  However, I was referring to the instructions that 
you placed in your jump table.  If you don't plan to lock the boot 
section to make it unreadble from the application section, you can 
use a table of addresses in the bootloader.  If you do plan to lock 
the boot section, you'll need to make a table of jumps in the 
bootloader.

I use this technique in my applications and it works flawlessly.  
There have been several threads on AVR Freaks on this topic, some 
including example code.

Don Kinzer
ZBasic Microcontrollers
http://www.zbasic.net