AVR-Chat

Hi
very pleased with
www.ebay.com

Jacques
--- In AVR-Chat@yahoogroups.com, xolang1 <xolang1@...> wrote:
>
> Hi all
> 
> Everytime I need a part, I have difficulty searching for 
suppliers/distributors
> that cater to single/low volume orders thats typical for 
personal/hobby projects.
> May I request If anyone can kindly add to my list:
> 
> www.mouser.com
> www.parallax.com
> www.futurlec.com
> www.digikey.com
> 
> Anyone else?
> 
> thanks!
> 
> Chris
> 
> 
>  
> 
> --- On Fri, 9/5/08, drgert1 <drgert1@...> wrote:
> From: drgert1 <drgert1@...>
> Subject: [AVR-Chat] Re: Getting started on AVR with USB
> To: AVR-Chat@yahoogroups.com
> Date: Friday, September 5, 2008, 1:09 PM
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>     
>             Hi,
> 
> 
> 
> Yes, I saw that one, too. 
> 
> http://focus. ti.com/docs/ toolsw/folders/ print/ez430- f2013.html
> 
> 
> 
> I saw a similar one from ST
> 
> http://www.st. com/mcu/contenti d-89-15-ST7FUS_ PRIMER.html
> 
> 
> 
> However please help me understand if this part is actually helping 
me.
> 
> I see it such that the USB connector is 'only' the programming
> 
> interface to the actual (quite tiny) MCU board. The MCU is then
> 
> supposed to be taken stand alone and does not have USB connectivity 
by
> 
> itself. I don't know how difficult it would be to 'channel' my
> 
> measurements through that path:
> 
> mcu -> (probably) serial -> programmer -> USB -> PC
> 
> 
> 
> Something where the USB is actually part of the MCU would be much 
nicer.
> 
> 
> 
> I found this one;
> 
> http://www.olimex. com/dev/avr- usb-162.html
> 
> 
> 
> But it has the AT90USB162 which does not have A/D capability.
> 
> 
> 
> After all the Atmel board 'AT90USB1287' has the A/D feature.
> 
> 
> 
> Thanks,
> 
> Gert
> 
> 
> 
> --- In AVR-Chat@yahoogroup s.com, "Cat Hotmail" <catalin_cluj@ ...> 
wrote:
> 
> >
> 
> > While not quite AVR, you might want to look at the EZ430 from TI 
(just 
> 
> > google it).
> 
> > 
> 
> > Good luck.
> 
> >
>