This is very similar to what I was having. I could programme the device using ISP mode from the JTAG ICE MKII but could not do it from the ISP. I re-flashed it and it started working again. No idea why it was like that in the first place as I had never used it from new. Good luck Dave. From: AVR-Chat@yahoogroups.com [mailto:AVR-Chat@yahoogroups.com] On Behalf Of bit_tricks Sent: 21 January 2010 07:01 To: AVR-Chat@yahoogroups.com Subject: [AVR-Chat] Re: AVRISP -> AtTiny Communication Problem Seems to me like I was able to revive an AVRISPmkII that exhibited the same "orange blinking light" behavior that you described earlier in this thread. Since the unit I repaired had previously been used by someone else, I'm uncertain how it arrived at that state. Anyhow, the manual firmware upgrade may be worth a try at this point. HTH, Rick [Non-text portions of this message have been removed]
Message
RE: [AVR-Chat] Re: AVRISP -> AtTiny Communication Problem
2010-01-21 by Dave McLaughlin
Attachments
- No local attachments were found for this message.