AVR-Chat

See it ...

http://www.8051projects.net/lofiversion/t45042/repairing-dead-avr-dragon-board-bugg-fixing-tips.html



2012/11/12 Chuck Hackett <egroupscdh@up844.us>

> **
>
>
> My AVR Dragon seems to have died.
>
> I programmed one board, swapped boards to program the next one and noticed
> that Studio reported an error and the LMxxx regulator on the board was
> getting hot.
>
> Both boards have been programmed many times in the past.
>
> Now when I connect the Dragon to a target board it is apparently shorting
> Vcc to Gnd.
>
> The problem is on the Dragon board itself (as opposed to through the USB
> cable) because it happens even when the USB cable is unplugged from the
> Dragon.
>
> Is there anyone that might have the capability to repair it? I�m willing to
> reimburse reasonable costs�
>
> Cheers,
>
> Chuck Hackett
> "Good judgment comes from experience, experience comes from bad judgment"
> 7.5" gauge Union Pacific Northern (4-8-4) 844
> http://www.whitetrout.net/Chuck
>
>  
>


[Non-text portions of this message have been removed]