Daniel
Is
necessary to make one connection between the PC2 to BSEL2 (only for ATmega8) in
the STK500 board.
Edson
-----Mensagem original-----I am trying to program a mega8 chip (actually I have tried 3 different
De: Daniel Boyer [mailto:dpboyer@dpicts.com]
Enviada em: quarta-feira, 29 de setembro de 2004 18:24
Para: AVR-Chat@yahoogroups.com
Assunto: [AVR-Chat] Mega8 programing problem
ones) and I keep getting errors entering programing mode. I am using
the STK500 board and AVR Studio version 4.09. The chips are the flat
quad package and I think that is where my problem is arising since I
must use program off of the stk500 board (which I have never done
before). I made a quick pcb
(http://www.dpicts.com/ForumPics/mega8a-2.jpg) to attach to the 6 pin
connector on the stk500 to program the chip. I am not changing any
jumpers or anything on the stk500 (maybe this is my problem). I have
made 4 different PCBs thinking that I had a trace wrong or broken, but
all pcbs and all three chips have failed. Anyone have any suggestions
as to what I might be doing wrong?
Thanks,
Daniel
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.770 / Virus Database: 517 - Release Date: 27/9/2004
){kind=link}
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.770 / Virus Database: 517 - Release Date: 27/9/2004