AVR-Chat

Çäðàâñòâóéòå, Javier.

Âû ïèñàëè 10 ôåâðàëÿ 2005 ã., 14:31:54:

  
> Hey all, i have a little C  programming question....
> I am using a Atmel Dataflash Library which contais the  next sentence
>  
>      DF_DD|=(1<<DF_MOSI)|(1<<DF_SCK)|(1<<DF_SS);     // Set SCK, MOSI & SS as outputs 
>  
> i am  defining:
>     #define  DF_DD            DDRB      // SPI Port Data Direction  Register
>     #define  DF_PORT          PORTB     // SPI Port Register
>     #define  DF_SS           PORTB.4    // Chip Select bit
>     #define  DF_SCK         PORTB.7     // SPI Clock bit    
>     #define  DF_MOSI        PORTB.5    //  SPI Master Out bit
>     #define  DF_MISO        PINB.6      // SPI Master In bit 
>     #define  DF_RDY          PINC.5     // RDY/BSY Flag  (Hardware)

Use such definitions
     #define  DF_SS           4    // Chip Select bit
     #define  DF_SCK          7     // SPI Clock bit    
     #define  DF_MOSI         5    //  SPI Master Out bit
     #define  DF_MISO         6      // SPI Master In bit 
     #define  DF_RDY          5     // RDY/BSY Flag  (Hardware)
 
You are using an bit shifting. You cann't shift an C extension
(POTRX.<digit>)

-- 

 Valerij