AVR-Chat

On Sun, Oct 09, 2005 at 09:53:45PM +0200, Robert Moro wrote:

> I want use my STK500 on a half duplex RF-link. Is this possible? Does
> anybody have experience with this?

I've done this, sorta.  I used a pair of MaxStream 9XCite 900 MHz 9600
baud wireless modules for the link.  I didn't use an actual STK500,
but instead used Jason Kyle's STK500 emulating bootloader on one of my
MAVRIC-IIB boards.

I used it to reflash my robot from a remote location without having to
to actually have a physical connection.  Worked great.

For an actual STK500, though, you will need something that support
115.2 kbps.  In my case, since it was a bootloader and I was using
AVRDUDE to drive it, I could slow the baud rate down to the 9600 baud
supported by the radio link.

-Brian
-- 
Brian Dean
ATmega128 based MAVRIC controllers
http://www.bdmicro.com/