--- In AVR-Chat@yahoogroups.com, Zack Widup <w9sz@p...> wrote: > 9600 baud is difficult to implement with an AVR running at 16 MHz. My 4-channel implementation can run at 19200 baud reliably but only if just one channel is open. For 2 to 4 channels, the maximum baud is limited to 9600. Of course, at the higher rates there's not much time left to do very much other processing so a lower maximum rate is better. Don ZBasic Microcontrollers http://www.zbasic.net
Message
Re: question about serial port bit banging
2005-12-28 by Don Kinzer