AVR-Chat

I have never had trouble at the PC end changing baud rates.
I used Delphi in my last project.
So long as you make sure you were not in the middle of recieving something and flush the buffers then you should have no problems.

www.ckp-railways.talktalk.net/pcbcad21.htm


----- Original Message ----
From: David VanHorn <microbrix@gmail.com>
To: AVR-Chat@yahoogroups.com
Sent: Tuesday, 20 March, 2007 6:52:36 PM
Subject: Re: [AVR-Chat] Re: MEGA8 RS232









  


    
            >

>

> Also, not be an issue with the AVR's, but I know the PC uart's do NOT

> like you changing the Baud Rate with the receivers / transmitters

> enabled.  I would move the Receiver / Transmitter enable to the end of

> the init, rather than doing it first.



You can change things on the fly in the AVRs, but I would advise this too.

Set it up, then enable.



[Non-text portions of this message have been removed]





    
  

    
    




<!--