AVR-Chat

Hi Guys,

I started a new project with an ATmega88, and I need two fast-PWM 
signals. One it will be an inverted signal of the other signal.
I wrote the code, but when I simulate it on AVRStudio, I don't get 
out any signal. Did I missed something?
Here comes the code:


.include	"m88def.inc"
;============================
;Declarations:
.def	temp=r16
;============================
;Start of program:
	rjmp 	Init
Init:
;=====================
;Port B initialization
;---------------------
	ldi temp, 0x00
	out PORTB, temp
	ldi temp, 0x08
	out DDRB, temp
;=====================
;Port D initialization
;---------------------
	clr temp
	out PORTD, temp
	ldi temp, 0x08
	out DDRD, temp
;==============================
;Timer/Counter 2 initialization
;------------------------------
;Clock source: System Clock
;Clock value: 14745,600 kHz
;Mode: Fast PWM top=OCR2A
;OC2A output: Non-Inverted PWM
;OC2B output: Inverted PWM
	ldi temp, 0xB3
	sts TCCR2A, temp
	ldi temp, 0x09
	sts TCCR2B, temp
	ldi temp, 0x00
	sts TCNT2, temp 
	ldi temp, 0x7F
	sts OCR2A, temp
	ldi temp, 0x7F
	sts OCR2B, temp
;=====================
;Main body of program
;--------------------
Start:
;<Write program here>
	rjmp	Start			;loops back to Sart