AVR-Chat

I have a few 4X40 LCD's that display rubbish without adding a 220nf cap to gnd on the lcd bios pin.
  Owen.

John Samperi <samperi@ampertronics.com.au> wrote:
          At 02:01 AM 23/08/2007, you wrote:

>Kathy Quinlan wrote:
> > I have had problems with Ampire displays and static, I found that by
> > grounding the LCD Bezzle I could stop this problem.
>
> >
>Have had a quick go at this but no change - did you get the same
>symptoms or did the static problem perhaps stop it working completely?

I have temperature related failures of LCDs. On a hot day and after
running for a while the LCD stops working correctly, the same code
works well with other brands of LCDs, don't know what chip it uses,
just 2 blobs.

I have heard of people putting small caps (15pf or so) in the E line,
don't know if this will help with your problem or mine.

Regards

John Samperi

********************************************************
Ampertronics Pty. Ltd.
11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
Tel. (02) 9674-6495 Fax (02) 9674-8745
Email: john@ampertronics.com.au
Website http://www.ampertronics.com.au
*Electronic Design * Custom Products * Contract Assembly
********************************************************



         

       
---------------------------------
Get the World's number 1 free email service. Find out more.

[Non-text portions of this message have been removed]