AVR-Chat

Dear all;
              i want ask about Calibrated Internal RC
Oscillator  and Oscillator Calibration Register
� OSCCAL for ATmega8535(L) 
As i need to understand it .so if anyone can explain it , i will be pleasure.
Thanks for all




      ____________________________________________________________________________________
Be a better sports nut!  Let your teams follow you 
with Yahoo Mobile. Try it now.  http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ

[Non-text portions of this message have been removed]

I'm new to AVR so I can't get into specifics.  In general, to avoid  
using an external crystal a timebase for the chip can be generated by  
an internal RC.  These types of RC are not very precise so the chip  
maker can do one of two things.  1.  Make them more precise by  
individually trimming the R using a laser on a chip by chip basis to  
improve accuracy.  2. measure just how imprecise the RC is on a chip  
by chip basis and store a correction factor that is applied to get  
the clock.  That correction factor is stored in the oscillator  
calibration register.

I hope that's what you were looking for.

On Nov 27, 2007, at 3:58 PM, mido glgl wrote:

> Dear all;
>               i want ask about Calibrated Internal RC
> Oscillator  and Oscillator Calibration Register
> – OSCCAL for ATmega8535(L)
> As i need to understand it .so if anyone can explain it , i will be  
> pleasure.
> Thanks for all
>
>
>
>
>        
> ______________________________________________________________________ 
> ______________
> Be a better sports nut!  Let your teams follow you
> with Yahoo Mobile. Try it now.  http://mobile.yahoo.com/ 
> sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>

The chip designers tried to make the devices as versatile as possible for 
the money you pay.  Face it, these microcontrollers are inexpensive! I can 
remember what 8008's cost when they first came out.  :-)

Having provisions for an internal RC oscillator, an external RC 
oscillator, two different types of oscillators using different types of 
elements, is pretty versatile.  They let the engineer decide what he 
needs based on cost versus performance.

The internal RC oscillator is great for a minimum external component count 
but, as has been noted by a few people, changes frequency with supply 
voltage and temperature.  I don't use them for applications that require 
an exact frequency as a reference.  You could go to the trouble of adding 
external circuitry to regulate temperature and voltage to the nth degree, 
but it would be far cheaper to just supply extra board space for a quartz 
crystal or clock oscillator.

Zack

On Tue, 27 Nov 2007, Philippe Habib wrote:

> I'm new to AVR so I can't get into specifics.  In general, to avoid
> using an external crystal a timebase for the chip can be generated by
> an internal RC.  These types of RC are not very precise so the chip
> maker can do one of two things.  1.  Make them more precise by
> individually trimming the R using a laser on a chip by chip basis to
> improve accuracy.  2. measure just how imprecise the RC is on a chip
> by chip basis and store a correction factor that is applied to get
> the clock.  That correction factor is stored in the oscillator
> calibration register.
>
> I hope that's what you were looking for.
>