Alesis Andromeda A6 group photo

Yahoo Groups archive

Alesis Andromeda A6

Index last updated: 2026-04-28 22:41 UTC

Thread

Emulating Jupiter 6 sounds on the Andromeda

Emulating Jupiter 6 sounds on the Andromeda

2003-03-22 by edgeofdawn_de

Hey there !

I'd like to program two Jupiter 6 sounds on my Andromeda. You can 
find the sounds at my homepage :
www.edgeofdawn.de/BasslineVCF90.mp3
www.edgeofdawn.de/Syncarp90.mp3

It sounds like the best way to emulate the filter sound is to use the 
A6's 12 dB filter with plenty of resonance. The keyboard velocity 
seems to control the filter frequency. But I especially got problems 
programming the Syncarp sound on my Andromeda.

It would be great if you could check out the MP3s and tell me how you 
would program it or send me a patch.

Thanks a lot !


Best regards,
- Edge Of Dawn -

Re: [a6-ion][Andromeda_A6-ION] Emulating Jupiter 6 sounds on the Andromeda

2003-03-22 by MoogulatoR.com

> Hey there !
> 
> I'd like to program two Jupiter 6 sounds on my Andromeda. You can
> find the sounds at my homepage :
> www.edgeofdawn.de/BasslineVCF90.mp3
> www.edgeofdawn.de/Syncarp90.mp3
> 
> It sounds like the best way to emulate the filter sound is to use the
> A6's 12 dB filter with plenty of resonance. The keyboard velocity
> seems to control the filter frequency. But I especially got problems
> programming the Syncarp sound on my Andromeda.
> 
> It would be great if you could check out the MP3s and tell me how you
> would program it or send me a patch.
> 
> Thanks a lot !
> 
Imo this is more for the pitchmod of the syncing osc pitch!
You can put the envs velocity sens. High and mod the decay by velo,too.. To
you likes.

The oscs are more important than filters imo on sync sounds.
I'd not choose to much reso. I do not hear reso.
This is a typical hard synched sound!

synthesizer & equipment fragen? Bitte NUR übers Forum www.synthetisch.de

Moogulator - Journalist Synthesizer & Computer (amazona.de / sequencer.de)
ConseQuence - Future Beatz morph into Industrial (consequence.info)
Maschinensound! - Maschinenkulturmagazin & Livedates (maschinensound.de)

FuturistiQ MusiQ & gear Sites&Forum - MoogulatorNetworQ:
http://www.moogulator.com              icq96046184

gear&synth questions? please use the forum www.synthetisch.de

Re: [a6-ion][Andromeda_A6-ION] Emulating Jupiter 6 sounds on the Andromeda

2003-03-23 by edgeofdawn_de

Hi !

Thanks a lot for your tips !
I managed to program a sound very similar to the SyncArp sound with 2 
square waves (pulse with modulation on both OSCs). The OSCs are hard 
synced, OSC2 frequency is modulated by the mod wheel. I used the BPF 
with plenty of resonance and very short Amp and Filter ENVs. The 
CutOff frequency is also modulated by the mod wheel. 

Best regards,
- Edge Of Dawn - 


> Imo this is more for the pitchmod of the syncing osc pitch!
> You can put the envs velocity sens. High and mod the decay by 
velo,too.. To
Show quoted textHide quoted text
> you likes.
> 
> The oscs are more important than filters imo on sync sounds.
> I'd not choose to much reso. I do not hear reso.
> This is a typical hard synched sound!

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.