Alesis Andromeda A6

Hello guys,

I have an A6 and an Ion... and i was wondering if any of you found a 
solution to remove that eletricty noise! I already bought a Power 
Bright Distribution (PB11 from Samson) and it helped but it didn't 
remove all the ground noise.

These 2 machines are really the only ones that make this. All the other 
machines in my set are clean.

I hope there is a clean free solution. =:)
Thanks.

Moreno

It's ok! Sorry, I should have googled before posting.
It's not really A6's or Ion's fault (and my Yamaha FS1R also).... 
seems anyway that they are more sensitive than my other machines.

I just plugged them in another electric outlet along with other 
electric devices and it did the job!
NO MORE NOISE GATEs!!!!!!!!!! HAHA!!!

Moreno

--- In Andromeda_A6-ION@...m, "Moreno" <hyppomauve@...> 
wrote:
>
> Hello guys,
> 
> I have an A6 and an Ion... and i was wondering if any of you found 
a 
> solution to remove that eletricty noise! I already bought a Power 
> Bright Distribution (PB11 from Samson) and it helped but it didn't 
> remove all the ground noise.
> 
> These 2 machines are really the only ones that make this. All the 
other 

> machines in my set are clean.
> 
> I hope there is a clean free solution. =:)
> Thanks.
> 
> Moreno
>

Hi Lucin, I could guess it's a problem with the electricity because 
when the Ion and the A6 were switched off it was making anyway ground 
noise. And when i unplugged the electric cables, there were no more 
bad unwanted sound artefacts but just plain silence. It was such a 
pleasure. My other synths (that are connected in multi-outlets) don't 
make any ground noise. I guess their manufacturers had done a better 
job in their PSU. Anyway, i solved the problem.

I have also a MD and i did experience momentarily the same problem. 
But now it's ok.

Moreno

--- In Andromeda_A6-ION@...m, s a <lucinniega@...> wrote:
>
> How do you know that it is the power supply? Are you sure that you 
are not getting RF? I recently experienced this with my elektron 
Machinedrum. I found out that the midi cable going into the 
machinedrum was not well sheilded and acted as an antenna for RF. 
Make sure that when you assess the problem that you disconnect the 
midi cables to see if the problem is then aleveated. Let me know how 
it works out for you.
>    
>   Peace,
>   Lucin 
> 
> Moreno <hyppomauve@...> wrote: 
>           Hello guys,
> 
> I have an A6 and an Ion... and i was wondering if any of you found 
a 
> solution to remove that eletricty noise! I already bought a Power 
> Bright Distribution (PB11 from Samson) and it helped but it didn't 
> remove all the ground noise.
> 
> These 2 machines are really the only ones that make this. All the 
other 

> machines in my set are clean.
> 
> I hope there is a clean free solution. =:)
> Thanks.
> 
> Moreno
> 
> 
> 
>          
> 
>  		
> ---------------------------------
> Do you Yahoo!?
>  Get on board. You're invited to try the new Yahoo! Mail Beta.
>