Boss VF-1 Effect Processor

Hi,
My VF-1 still has SW-Version 1.00 .It is really worth updating since 
some users on this group had problems after the procedure.
Does anyone on this group uses Version 1.13 (I found it on the Roland 
Germany website)?

Phil

Hello,

I had firmware version 1.10 and have updated to 1.13. The only -but 
important - difference which I found is that there is a new mode 
called "NRM(TAP)" in the assignable controller section (the old 
modes are NORMAL and TOGGLE). This is a tap tempo mode which works 
with an external momentary (unlatched) footswitch. However, I was 
too stupid to get it working with a midi controller. 

If you set your delay time to BPM and an assignable controller to 
MASTER BPM with mode NRM(TAP), source range 0-127, target range 40-
250 then the delay time will change after the 4th kick on the 
footswitch.

Arne


--- In BossVF1@yahoogroups.com, "phguru" <phguru@y...> wrote:
> Hi,
> My VF-1 still has SW-Version 1.00 .It is really worth updating 
since 
> some users on this group had problems after the procedure.
> Does anyone on this group uses Version 1.13 (I found it on the 
Roland 

> Germany website)?
> 
> Phil