ComputerVoltageSources

I spoke with Dave in sales at Basic Micro.

They do not even have an alpha version of the data sheet for the Pro 28-M (module).

I'm going to talk to the engineer, Nathan in charge of the 28-M project. He should be able 
to clarify what the pin assignments are, and also, how they have the EEPROM tied into the 
H8 chip, and the access methods for the EEPROM.

My guess is that it is tied to the I2C bus, which means the pullup resistors should be on 
the 28-M module. This does place a small limit on the I2C addresses available.

So progress continues, albeit with some unavoidable delays. I'll report when I have solid 
info.

--- In ComputerVoltageSources@yahoogroups.com, "Grant Richter" <grichter@...> wrote:
>
> What I meant to say was that I proof read the drawings.
> 
> Harry is doing all the heavy lifting and deserves mine and our gratitude for his public 
spirit 
> and generousity.
> 
> --- In ComputerVoltageSources@yahoogroups.com, "Grant Richter" <grichter@> wrote:
> >
> > Harry has the schematics captured, I've double checked them.
> > 
> > The hangup we have is no published datasheet for the 28 pin version of the Basic 
Atom 
> Pro. 
> > Harry and I are both concerned about pin assignments. LIke, what are they and will 
they 
> > change?
> > 
> > So I am going to take it on myself to go rattle Basic Micros cage until I can get at least 
a fax 
> > showing the pin assignments with someones signature on it.
> > 
> > It would be stupid to go to copper without being sure.
> >
>