I have a limited number of LCD Support PC Boards Rev. X00 and programmed Atmel ATTINY2313 chips with code by David Brown available. I will post complete parts lists and assembly information shortly. These will allow you to add a 16x2 backlit LCD display and MIDI to your PSIM. Cost is $15 for the PC board Rev. X00, programmed Atmel ATTINY2313, four ΒΌ inch #2/56 screws for mounting the LCD inconspicuously to a black faceplate, and four #2 washers. Shipping is extra for orders outside of the US and Canada. Additional parts for these boards from Mouser cost about $36 for the LCD function including LCD and $12 for the MIDI function including high quality MIDI connectors. I also have a limited number of 1x5 and 2x7 sockets for stacking the LCD Support PCB to the PCB. Inquire first, I'll sell the two sockets for $2.50 each if included with your PCB/chip order. This saves you from ordering a $6.77 breakaway socket strip from Mouser. There is one mistake on the board that can be fixed one of two ways (more details to be posted): 1) cut two 50 mil traces on the PCB and swap the connections, or 2) Make the connection between the LCD support PCB and LCD a 2x6 instead of 2x7, and make the final two connections by swapping two wires across the connection. This makes the two boards permanently attached. Email me for payment details. John Loffink The Microtonal Synthesis Web Site http://www.microtonal-synthesis.com The Wavemakers Synthesizer Web Site http://www.wavemakers-synth.com [Non-text portions of this message have been removed]
Message
LCD Support PCB Rev. X00 and Programmed Chip available
2006-08-12 by John Loffink