Message
Re: [Evolver] Re: problems with Midi-Ox
2003-09-26 by Stefan Weber
the resulting "Configure SysEx Buffers" dialog box, set the "Low
Level Output Buffers" as follows:
Size: 1,024 Bytes
Num: 128
This should take care of your problem. Do note that with more and
larger buffers, MIDI-OX is going to be finished sending the SysEx
messages long before the Evolver is done processing them. Make sure
to let the Evolver finish the upgrade process as described in Dave's
document.
Also make very sure that the Evolver is not powered off during this
procedure (again, as cautioned in Dave's document). I highly
recommend the use of a UPS, especially if you live in an area that
has dodgey power.
(This info is posted at EX5Tech as well, should you need it again in
the future, and find that it's been deleted here.)
Ski
www.ex5tech.com
EX5Tech Evolver forum:
http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23
--- In DSI_Evolver@yahoogroups.com, "Stefan Weber" wrote:
> Hi,
>
> I envy you all already teasting beta 1.5 as I'm having problems
transferring
> the sysex-files to the synth. After installing Mid-Ox (which went
perfectly)
> I followed ski's instructions on downloading the files (thank you
for
> instructing, ski!). The transmission of data began ok but about
half way through an
> error message occured reading: "SysEx Output Devices:
MMSYSTEM067..." and
> something like data are being transmitted to the device; repeat the
procedure
> as soon as the transmission is completed. This does not make sense
to me so I
> am wondering if someone had the same problem?
>;
> Thanks a lot, Stefan.
>
> ;
>
> --
> NEU FÜR ALLE - GMX MediaCenter - für Fotos, Musik, Dateien...
> Fotoalbum, File Sharing, MMS, Multimedia-Gruß, GMX FotoService
>
> Jetzt kostenlos anmelden unter http://www.gmx.net
>
> +++ GMX - die erste Adresse für Mail, Message, More! +++
To unsubscribe from this group, send an email to:
DSI_Evolver-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.