Dave Smith Instruments SYNTHESIZERS

I *think* I had a similar dilema(i've got PCR-50 midi controller, usb 
audiophile, and evo)and solved it this way:
Midi controller connected to PC via USB
Digi-out to Evo in
Digi-in to Evo out
The *trick* is to then download and install the great Midi-Ox 
program.  Set it up to send incoming midi messages from your midi 
controller to the Digi's output. It's a piece of cake to configure. 
This will solve your problem but your computer will need to be "on" 
and midi-ox running in order play the evo with your midi controller. 
I should also recieve and send midi messages with no problems. Not a 
bad trade-off since the alternative is adding more potentially 
conflicting hardware to your set-up. Sweet and simple.

Hope that helps...
-Rick         


--- In DSI_Evolver@yahoogroups.com, "schrieks834" <schrieks@h...> 
wrote:
> Hello..
> I am having trouble routing my evolver properly. If anyone has 
similar gear or enough know-how, please help me out.
> My relevant gear:
> Oxygen 8 connected to a WinXP PC via USB, Evolver, Digi001
> Plus I have the Evolver software.
> 
> What kinda works:
> digi-out to evolver-in +
> digi-in to evolver-out
> BUT I cannot use the oxygen 8 (as far as I know)
> 
> Another config that kinda works:
> oxygen8-"usb"-midi-out to evolver in +
> evolver out to digi001 in.
> BUT I cannot use the oxygen 8 (as far as I know).. I CAN use the 
little virtual keyboard and other settings in the program.
> 
> Another config that kinda works:
> oxygen8-"keyboard"-midi-out to evolver in +
> evolver out to digi001 in.
> BUT I cannot transmit midi through the program to evolver.
> 
> 
> What I want: to be able to transmit both ways to/from evolver 
to/from the program, AND have the oxygen 8 trigger sounds.
> 
> Thanks in advance!
> Sean