Dave Smith Instruments SYNTHESIZERS

How about a few more details?

1) Mac or PC?

2) What program are you using to load the SysEx files?

3) Even if you're not using MIDI-OX on a PC, are you following the 
basic procedure detailed in the forum topic below?

Using MIDI-OX to Save & Load Evolver Patches
http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?
ubb=get_topic&f=23&t=000013

(Note:  If your email client or the Yahoo group splits the link(s) 
above onto two lines, you may need to copy/paste the link(s) into 
your browser address bar.)

4) Are you sending ONE SysEx file that contains data for bank C and 
bank D, or two SysEx files (one each for C and D), or something else?

5) This is possibly the most important question:  Do you KNOW for a 
fact that your SysEx data (whether it's one or more files) contains 
some Programs to load into bank C, and some different Programs to 
load into bank D, and that there's no overlap?  It would be very easy 
to build a SysEx file that does exactly what's happening to you (i.e. 
loads the same Programs into banks C and D).  If you're familiar with 
the Evolver SysEx Program data format, take a peek with a hex editor 
and see if there are any obvious problems.


Ski
www.ex5tech.com
EX5Tech Evolver forum:
http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23


--- In DSI_Evolver@yahoogroups.com, sinus <electroschroeder@g...> 
wrote:
> hey 
> i tried several times to transmit the banks for c and d the problem 
is
> always that the sys ex data goes on bank c and d together so they 
both have
> the same programs , can somebody help me?
> stefan