Dave Smith Instruments SYNTHESIZERS

I initially could not get MidiOX to work. I eventually did by disconnecting
all but the Evolver MIDI connection. As to exactly why that worked, I'm not
sure.

-----Original Message-----
From: DSI_Evolver@yahoogroups.com [mailto:DSI_Evolver@yahoogroups.com]On
Behalf Of tomw97
Sent: Wednesday, August 17, 2005 5:39 AM
To: DSI_Evolver@yahoogroups.com
Subject: [Evolver] Re: New 3.0 update for Evolver - It's COOL!


I had a similar problem - couldn't get Midi-Ox to send the sysex.
Wrote to Dave and he wasn't sure what the problem was, eventually I
used Cubase to send it and it was fine.
The upgrade is fantastic - definitely worth $25 to get the thing
working with my BCF2000 controller - oscillator levels and filter
freqs on faders, knobs for feedback, distortion etc.
Even if you don't spend money on the chip, there are two complete new
sets of Evo patches (v.3 and the PEK patches) which are really good,
and more logically arranged than the previous patches.
Thanks, Dave!


--- In DSI_Evolver@yahoogroups.com, Robert Krueger <rkr1@t...> wrote:
> Robert Krueger wrote:
> > Hi all,
> >
> > I've recieved my Evolver upgrade for 3.0.  The instructions state to
> > update the DSP software first by loading the 3.0 sysex software.  The
> > directions state that a countdown on screen will begin from 58 to 0
> > during the midi dump,  then a countdown from 10 to zero as it updates
> > the flash.....
> >
> > I've sent the midi dump several times, and it just sits at zero.  The
> > countdown from 10 to zero never happens...
>
>
> I solved my own issue,  I used another app and slowed down the transfer
> rate.  This seemed to do it.







Yahoo! Groups Links