Dave Smith Instruments SYNTHESIZERS

Here is a rather large picture of an MEK prototype:
http://www.trippler.net/mek/meklarge.jpg

Not a very good photo, I hope you can read the labelling though.

> > Are those knobs smooth

Most likely all will be smooth.

> > Are the knobs infinite (like on a Microwave XT)?

Yes.

> > Finally, how is the sequencer represented on the front panel ?
> > Is there 8 flicking lights like on a mono, or 16 lights, ?

There are 16 LEDs for the sequencer. The knobs in the Filter/Amp section 
will control the sequencer too.

> > Which means i'D use the MEK as a controller for soft synths.

I am not sure if this will work. THe knobs of the MEK don't send midi but 
sysex data.

Regards
Stefan


----- Original Message ----- 
From: "Simon " <simonvolt@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Friday, March 03, 2006 2:06 AM
Subject: [Evolver] MEK over MONO


> Hey guys,
>
> I'm planning to buy a MEK when it comes out, but
> i would have to sell my Evolver#162 and my Novation Remote25 controller.
> Which means i'D use the MEK as a controller for soft synths.
>
> Is there anyone who has seen an actual MEK board and  can tell me
> exactly how are the knobs and buttons represented on the panel
> and what parameters they control ? (i can't see anything on Dave's
> picture of the MEK)
>
> Are those knobs smooth (or with a tick like the ones on the mono
> evolver) ?
> Are the knobs infinite (like on a Microwave XT)?
>
> Finally, how is the sequencer represented on the front panel ?
> Is there 8 flicking lights like on a mono, or 16 lights, ?
>
> Thanks for the info,
>
> Simon
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>