Dave Smith Instruments SYNTHESIZERS

The output pan parameter isn't really a pan parameter, but an output spread 
parameter. Therefore keyboard panning will only work if ONLY oscillators 1 
and/or 3 OR oscillators 2 and/or 4 are active.

If you however use only odd or even oscillators, Midi Note Number routed to 
output pan will work and you can adjust the L/R offset with the output pan 
parameter.

Greats

Stefan

----- Original Message ----- 
From: "chisel316" <chisel316@...>
To: <DSI_Evolver@yahoogroups.com>
Sent: Sunday, February 21, 2010 11:00 AM
Subject: [DSI Synths] Panning across keyboard on desktop evolver


I'm trying to setup a patch that pans across the keyboard.  For example, 
lower notes will play through the left speaker and higher notes will play 
through the right speaker.  The closest I can get is to get lower notes to 
play through the center and higher notes to play through the right.  I'm 
setting the Output Pan to mono (or the Pan effect doesn't seem to work at 
all) and setting my Mod source to Mno (MIDI note), Mod destination to Pan, 
and Mod Amount to -99.  If I set it to 99, then it Pans opposite (from left 
to center) and if I set it to 0 it obviously doesn't Pan at all.  I haven't 
found a setting that will pan from full left to full right.  Any 
suggestions?

Thanks!
chisel316