Dave Smith Instruments SYNTHESIZERS

Which part were you interested in?  Programming the NRPN's is not complicated once you get a clear explanation.

The problem (at least with my controller) is that any value over 127 must be split between two knobs.  For example, the filter frequency which goes to a value of 164, would have to programmed 0-127 on one knob and 128-164 on an other.  Similarly with the midi CC's you only have a 0-127 range, which in the case of the filter frequency is 37-164.  Kind of a bummer if you want to do crazy sweeps by hand. (so are the encoders though unfortunately)

I've heard people mention the BCr2000 used with the mopho, so possibly there is way to program that to work more fluently with NRPN's, I'm not sure.





--- In DSI_Evolver@yahoogroups.com, Oliver Haas <oliver4sound@...> wrote:
>
> Hi,
> Â 
> I was waiting for an answer on this subject as well, however the forum here is pretty lame.
> Â 
> Would you share your expereince ?
> Â 
> R
> 
> 
> ________________________________
> From: lutherblisset63 <jimbob1234@...>
> To: DSI_Evolver@yahoogroups.com 
> Sent: Wednesday, 12 September 2012, 4:07
> Subject: [DSI Synths] Re: mopho + nrpns
> 
> 
> Â  
> Never mind. figured it out. 
> 
> The values of 127 have to mapped to two knobs which is not ideal, but works nevertheless.
> 
> --- In mailto:DSI_Evolver%40yahoogroups.com, "lutherblisset63" <jimbob1234@> wrote:
> >
> > Hi,
> > 
> > I have a kenton control freak midi controller and I wanted to program the mopho from that using NRPN's. I have read through the manual etc., but still haven't quite figured it out. If anyone could give me quick example or point me in the right direction it could save me years. The control freak has two options, either [NRPN MSB + LSB] or [NRPN + MSB]. In the case of [NRPN MSB + LSB] the four inputs required are: (not including the range)
> > 
> > controller MSB
> > Controller LSB
> > Data MSB
> > Data LSB
> > 
> > The [NRPN + MSB] option is the same but does not include DATA LSB.
> > 
> > 
> > The only luck I have had so so far is setting the controller LSB to the NRPN listed in the mopho manual, setting the controller MSB to 0 and the Data MSB to the knob. This works, but the data jumps from 0 to the high value and nothing in between. In short, I really don't know what I'm doing. 
> > 
> > Any information at all would be greatly appreciated.
> >
>