Dave Smith Instruments SYNTHESIZERS

a midi merge or splitter would do the job (splitter is cheaper), but, i'm assuming yer running some kinda midi sequencing s/w ??
i only know Logic, but, reckon it may apply - there should be a setting in yer s/w seq to enable a *soft* midi thru.
 
I have the following set up on my lappy:
controller k/b midi out --> pc midi in --> [s/w seq midi thru]
then, pc midi out --> wee blue beastie midi in
 
(my set up is actually more complex but that's the gist of it!)
you can then select the DSI from yer arrange page of the midi seq and then (assuming all the channels are correctly set up in s/w)  playing the k/b will trigger the DSI via the sequencer (and, if *record* is enabled also record the playing as midi data) the only drawback with this simple set up is tha there's no recording of DSI knob tweakings but otherwise works well.
Graeme 


 
 


---------------------------------
Do you Yahoo!?
Free online calendar with sync to Outlook(TM).

Thanks for the advice, Graeme

I just attempted your scheme with my setup.  My only sequencer 
currenty is Project 5, which has midi sync. But so far the Evolver 
hasn't responded happily to my attempts.  I set Midi recieve to ON, 
Midi Clock setting to IN, Trigger select to ALL. But when I press 
play on my sequencer (with midi sync on & desired output settings) - 
no dice so far. I also wasn't sure if there were anything else I 
should do to get evolver ready to recieve via midi sync.  Of course 
the problems could be somewhere else but judt thought I'd check to 
get the Evolver side of it straight.          

Evolver make a good laptop companion as it's really small and fits 
nicely next to the laptop on my desk!  I hope I can get this 
working!!!!    

From:   graeme <doghead61@y...> 
Date:  Thu May 29, 2003  4:25 am
Subject:  that syncing feeling....

 
ADVERTISEMENT
 
 
a midi merge or splitter would do the job (splitter is cheaper), but, 
i'm assuming yer running some kinda midi sequencing s/w ??
i only know Logic, but, reckon it may apply - there should be a 
setting in yer s/w seq to enable a *soft* midi thru.
 
I have the following set up on my lappy:
controller k/b midi out --> pc midi in --> [s/w seq midi thru]
then, pc midi out --> wee blue beastie midi in
 
(my set up is actually more complex but that's the gist of it!)
you can then select the DSI from yer arrange page of the midi seq and 
then (assuming all the channels are correctly set up in s/w)  playing 
the k/b will trigger the DSI via the sequencer (and, if *record* is 
enabled also record the playing as midi data) the only drawback with 
this simple set up is tha there's no recording of DSI knob tweakings 
but otherwise works well.
Graeme

On Fri, May 30, 2003 at 11:11:31PM -0000, rickyannotta wrote:
> But when I press play on my sequencer (with midi sync on & desired output
> settings) - no dice so far. I also wasn't sure if there were anything else
> I should do to get evolver ready to recieve via midi sync.

Are the midi channels set correctly (hmm, is clock sync channel-specific)?

> Evolver make a good laptop companion as it's really small and fits 
> nicely next to the laptop on my desk!

Yeah it's a great form factor; fits nicely in the blank spot on a nord lead
too.  I wish more manufacturers would make 'em this size...

-Miles
-- 
P.S.  All information contained in the above letter is false,
      for reasons of military security.

--- Miles Bader <miles@...> wrote: 
---------------------------------

> Are the midi channels set correctly (hmm, is clock 
> sync channel-specific)?

MIDI clock is never channel-dependent, regardless of
the piece of gear in question, so I highly doubt that
is the problem...

 

______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca

Is there a shareware type program that will enable your computer to 
act as a midi thru? I have a feeling midi-ox or midi yoke, but wasn't 
able to tell from their website...too complicated for my simple mind. 
I don't have a real audio/midi sequencer (like to get sonar 2.2 
eventually) as of yet and what I'm using doesn't let me midi thru to 
the evolver.
Thanks,

Rick


--- In DSI_Evolver@yahoogroups.com, graeme <doghead61@y...> wrote:
> a midi merge or splitter would do the job (splitter is cheaper), 
but, i'm assuming yer running some kinda midi sequencing s/w ??
> i only know Logic, but, reckon it may apply - there should be a 
setting in yer s/w seq to enable a *soft* midi thru.
>  
> I have the following set up on my lappy:
> controller k/b midi out --> pc midi in --> [s/w seq midi thru]
> then, pc midi out --> wee blue beastie midi in
>  
> (my set up is actually more complex but that's the gist of it!)
> you can then select the DSI from yer arrange page of the midi seq 
and then (assuming all the channels are correctly set up in s/w)  
playing the k/b will trigger the DSI via the sequencer (and, if 
*record* is enabled also record the playing as midi data) the only 
drawback with this simple set up is tha there's no recording of DSI 
knob tweakings but otherwise works well.

> Graeme 
> 
> 
>  
>  
> 
> 
> ---------------------------------
> Do you Yahoo!?
> Free online calendar with sync to Outlook(TM).