Dave Smith Instruments SYNTHESIZERS

Hi there,

I've got a question about controlling cc parameters in the evolver
from my remote25. Is this uberhaupt possible ?
I tried but failed. I programmed the controllers according to the
manual, the evolver is recieving them but nothing happens.
I hope somebody can help.

met vriendelijke groet,

Michiel

--- In DSI_Evolver@yahoogroups.com, "michiel_2004" 
<michiel_2004@l...> wrote:
> Hi there,
> 
> I've got a question about controlling cc parameters in the evolver
> from my remote25. Is this uberhaupt possible ?
> I tried but failed. I programmed the controllers according to the
> manual, the evolver is recieving them but nothing happens.
> I hope somebody can help.
> 
> met vriendelijke groet,
> 
> Michiel

There are only a few parameters you can control on the evolver from 
the remote 25 (the cc ones).  The sysex implementation on the remote 
25 is to primitive to really make it an effective controller for the 
evolver much beyond a few basic things.

--- In DSI_Evolver@yahoogroups.com, "dodgingrain" <Chris@c...> wrote:
> --- In DSI_Evolver@yahoogroups.com, "michiel_2004" 
> <michiel_2004@l...> wrote:
> > Hi there,
> > 
> > I've got a question about controlling cc parameters in the evolver
> > from my remote25. Is this uberhaupt possible ?
> > I tried but failed. I programmed the controllers according to the
> > manual, the evolver is recieving them but nothing happens.
> > I hope somebody can help.
> > 
> > met vriendelijke groet,
> > 
> > Michiel
> 
> There are only a few parameters you can control on the evolver from 
> the remote 25 (the cc ones).  The sysex implementation on the remote 
> 25 is to primitive to really make it an effective controller for the 
> evolver much beyond a few basic things.

Thanks chris,
the only things i was interested in where quite simple.
like adsr for filter and amp
but i can't get it done in simple cc as stated in manual table
on page 54 to 59. Or is this a different controller type?

I believe the data on page 54 to 59 is sysex, not cc, cc doesn't go to 164
(filter cutoff for example) it only does 0-127.  Remote 25 only does 1 byte
of sysex as well which means you can't go to 164 there either.
Like I said, very few parameters can be controlled.

> -----Original Message-----
> From: michiel_2004 [mailto:michiel_2004@...]
> Sent: Tuesday, June 29, 2004 4:17 PM
> To: DSI_Evolver@yahoogroups.com
> Subject: [Evolver] Re: cc messages
>
>
> --- In DSI_Evolver@yahoogroups.com, "dodgingrain" <Chris@c...> wrote:
> > --- In DSI_Evolver@yahoogroups.com, "michiel_2004"
> > <michiel_2004@l...> wrote:
> > > Hi there,
> > >
> > > I've got a question about controlling cc parameters in the evolver
> > > from my remote25. Is this uberhaupt possible ?
> > > I tried but failed. I programmed the controllers according to the
> > > manual, the evolver is recieving them but nothing happens.
> > > I hope somebody can help.
> > >
> > > met vriendelijke groet,
> > >
> > > Michiel
> >
> > There are only a few parameters you can control on the evolver from
> > the remote 25 (the cc ones).  The sysex implementation on
> the remote
> > 25 is to primitive to really make it an effective
> controller for the
> > evolver much beyond a few basic things.
>
> Thanks chris,
> the only things i was interested in where quite simple.
> like adsr for filter and amp
> but i can't get it done in simple cc as stated in manual table
> on page 54 to 59. Or is this a different controller type?
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> Over 1 billion served! The most music videos on the web.
> Click to Watch now!
> http://us.click.yahoo.com/Xkrq7C/IARHAA/n1hLAA/QnLolB/TM
> --------------------------------------------------------------
> ------~->
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>