Dave Smith Instruments SYNTHESIZERS

Well thanks to reading your posts, and spending lots of time on the 
web I went for it and so far am amazed.  first thing I did was start 
tweaking the box a bit, looking at presets,  
wish it had a headphone jack :(  
so,  next step,  manual,  so far it isn't looking like the easiest 
thing in the world to program, but who knows I may be proven wrong.
I would really like to reset to the factory settings but isn't 
looking like there is a way to do that,  but we will see.

thanks again guys!
Aaron

Congratulations, Aaron! 

The output jacks will run headphones. I use a two male (right and left
output) to one female (headphone 1/4 input) for a stereo image.

Have fun!

Fletcher

--- In DSI_Evolver@yahoogroups.com, "aaron_bliss" <aaron_bliss@y...>
wrote:
> Well thanks to reading your posts, and spending lots of time on the 
> web I went for it and so far am amazed.  first thing I did was
start 

> tweaking the box a bit, looking at presets,  
> wish it had a headphone jack :(  
> so,  next step,  manual,  so far it isn't looking like the easiest 
> thing in the world to program, but who knows I may be proven wrong.
> I would really like to reset to the factory settings but isn't 
> looking like there is a way to do that,  but we will see.
> 
> thanks again guys!
> Aaron

"radiognome3" <fletcher@...> writes:
> The output jacks will run headphones. I use a two male (right and left
> output) to one female (headphone 1/4 input) for a stereo image.

Is there anywhere you can buy a real Y adapater with the correct 1/4"
plugs/jack for the evolver going into 1/4" headphone jack?  I couldn't
find one anywhere, so I ended up with this frankenstein thing composed
of a Y cable and like 12 jack adapters plugged into one another...

-Miles
-- 
Suburbia: where they tear out the trees and then name streets after them.

--- In DSI_Evolver@yahoogroups.com, Miles Bader <miles@g...> wrote:
> "radiognome3" <fletcher@k...> writes:
> > The output jacks will run headphones. I use a two male (right and
> > left output) to one female (headphone 1/4 input) for a stereo image.
> 
> Is there anywhere you can buy a real Y adapater with the correct 1/4"
> plugs/jack for the evolver going into 1/4" headphone jack?  I couldn't
> find one anywhere, so I ended up with this frankenstein thing composed
> of a Y cable and like 12 jack adapters plugged into one another...

An example of what you want to look for is:

http://www.hosatech.com/hosa/products/ypp-136.html

Hosa YPP-136 - stereo 1/4" female to 2 mono 1/4" males.  I believe
that's what I use and picked up at a random local music store, Haight Ashbury
Music Store in Sunnyvale, CA.  Ideally, one of the Hosa dealers on the net
should have it. 
 
http://www.hosatech.com/hosa/dealers/dealers_internet.html

Or, try one of your local music stores.  Good luck.

-jeff